CGI Construction in Banning, CA

Kitchen remodelingKitchen remodeling
Bathroom remodelingBathroom remodeling
Home additions & ADUHome additions & ADU
RoofingRoofing
Windows & doorsWindows & doors
Driveway & paversDriveway & pavers
FenceFence
Every visit starts with

Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled

Your dream remodel for as low as$199/month*On approved credit; ask for current terms
Get your free estimate

CGI Construction in Banning, CA | Polaris Contractors

Polaris Contractors provides independent CGI cabinet, countertop, and exterior trim service across Banning, CA. We’re the team homeowners call when CGI work needs to survive the San Gorgonio Pass wind corridor and a house that’s been standing since Eisenhower. One team, full scope, with direct product familiarity earned on real Banning job sites. Call (855) 473-6535 for a free estimate.

Call (855) 473-6535

We’re not a manufacturer-authorized dealer. We’re a full-scope general contractor that has installed and repaired CGI products in Banning for years, which means our recommendations come from what actually holds up here, not what a brand rep wants us to push. From kitchen remodels to countertop replacement to exterior trim on Sun Lakes-area homes, we know how CGI behaves in this climate. If you’re planning CGI sales & service anywhere in the Pass, start with a team that’s already done it here.

Why Banning Residents Choose Us for CGI Service

CGI work in Banning isn’t a showroom exercise. It’s cabinets that must stay square when 40 mph gusts rattle the exterior walls of a 1960s stucco tract home. It’s quartz countertops sitting over cabinet frames that have settled and racked for five decades in high-desert heat. It’s exterior trim getting sandblasted every spring wind event. We understand all of it because we’ve repaired all of it.

Rick Sondermann grew up in Corona del Mar and has spent the better part of three decades building and renovating homes up and down the Southern California coastline. He learned the fundamentals at Saddleback College in Mission Viejo, where hands-on coursework in building technology and estimating gave him a foundation he still draws on. His father was a finish carpenter who believed in doing things once and doing them right, and that philosophy stuck. Do it right the first time, the second time always costs more.

We’re a single-source contractor, not a specialty cabinet shop. That means when we install CGI cabinets in your Banning kitchen, we also see the framing, the subfloor, the electrical, the drywall. We catch what a cabinet-only installer misses.

Explore

Styles & brands we work with

Kitchen remodeling
Kitchen remodeling
Bathroom remodeling
Bathroom remodeling
Home additions & ADU
Home additions & ADU
Roofing
Roofing
Windows & doors
Windows & doors
Driveway & pavers
Driveway & pavers
Fence
Fence

Common CGI Construction Problems We Solve in Banning

  • Cabinet boxes swelling and delaminating at the toe kick and sink base. Decades of dry heat followed by winter condensation takes a toll on particleboard and MDF cores, especially when the original Banning install lacked a vapor barrier. We pull the affected boxes, address the moisture source, and reinstall with proper sealing.
  • Quartz and granite countertops cracking at sink cutouts and over dishwasher openings. Postwar tract homes in Banning settle. The cabinet frames rack, and the stone carries stress it was never designed to take. We check and correct the framing before we re-top, every single time.
  • Exterior trim and fascia chalking and splitting on west- and north-facing walls. Blowing sand in the Pass pits the finish, and wind-driven rain finds every open joint. We replace with properly sealed, back-primed material and re-caulk every seam.
  • Hinges and drawer slides binding within a few seasons. When the original 1950s – 70s wall framing is out of plumb, the CGI boxes twist and the hardware works against itself. We re-plumb the wall plane before install, then upgrade to soft-close hinges and full-extension slides.
  • Full kitchen refaces and partial replacements that don’t match. If you have an existing CGI kitchen and need new doors, drawer fronts, or a section of cabinets rebuilt, we source OEM CGI replacements so grain and color actually line up. No mismatched patchwork.

CGI Service in Banning: What Local Conditions Mean for Your Equipment

Here’s the detail out-of-area CGI installers routinely skip: Banning’s postwar tract homes were framed with wood that has now cycled through 50 to 70 years of high-desert expansion and contraction. That means the wall plane behind your cabinets is almost never flat, plumb, or square. A 1960s single-story near the Sun Lakes area can easily be out of plumb by three-quarters of an inch over eight feet. If a crew slaps CGI boxes against that wall without shimming and re-plumbing first, the cabinet runs will rack within a season or two, hinges will bind, doors will pop out of alignment, and the countertop will carry stress it wasn’t designed for.

We saw this on a CGI service in Valle Vista job near the Sun Lakes area. A 1960s stucco home with a CGI shaker cabinet run that had swelled at the sink base and was binding on its original hinges. The wall behind it was out of plumb by nearly an inch over eight feet. We re-plumbed the framing, shimmed the new CGI boxes, upgraded to soft-close hardware, and topped the run with a CGI quartz slab cut with a reinforced sink opening. That kitchen closes cleanly now, even when the Pass winds rattle the exterior walls.

This is the difference between CGI in Calimesa or Banning and CGI service anywhere else. We know the houses here. We know what 50-plus years of San Gorgonio Pass weather does to framing, stucco, and finish material. And we plan for it before the first cabinet box comes off the truck.

CGI Models & Products We Service in Banning

We work on the full CGI residential range: ready-to-assemble and semi-custom kitchen cabinets, including the shaker and raised-panel door styles common in Banning’s 1950s – 70s stucco tract homes. CGI quartz and granite countertop slabs for kitchen and bath remodels. CGI bath vanities and shower surround kits for older single-story homes. CGI exterior trim and fascia components on Sun Lakes-area and CGI repair in Yucaipa hillside remodels.

Parts strategy matters. When you want to match an existing CGI kitchen, we source OEM CGI replacement doors, drawer fronts, and hardware. When the original CGI hinges and slides have already failed, we specify quality aftermarket soft-close hinges and full-extension slides. The cabinet box rarely justifies a full tear-out if the frames are solid. On countertops and exterior trim, we replace rather than patch when the substrate is compromised. Banning’s heat and wind will find any weak seam within a season.

Before & after

See the difference

Before - Recent ProjectBeforeAfter - Recent ProjectAfter
Recent Project
Before - Full RestorationBeforeAfter - Full RestorationAfter
Full Restoration
Before - Complete UpgradeBeforeAfter - Complete UpgradeAfter
Complete Upgrade

CGI Service Pricing in Banning

CGI work in Banning costs what it costs because of the prep work, not just the product. Cabinet installs here almost always include wall re-plumbing and shimming, which out-of-area crews skip. Countertop replacement includes framing inspection and correction before stone ever goes down. Exterior trim work includes proper back-priming and joint sealing for the wind corridor. Here’s what to expect:

Service Typical Range in Banning
Full Kitchen Remodeling $14,000 – $45,000
Cabinet Installation $4,000 – $13,000
Countertop Installation $2,000 – $6,500
Backsplash Installation $800 – $2,500

Your exact number depends on the size of the job, the condition of your framing, and whether you’re matching existing CGI product or starting fresh. We give written line-item estimates so you can see exactly where your money goes. Call (855) 473-6535 and we’ll walk it through with you, free.

Serving Banning, CA — Our Local Coverage Area

We’re based in the Banning General Contractor area and know this community well. Use the map below to see our service coverage — if you’re nearby, we can almost certainly help.

FAQs – CGI Construction in Banning

Service Areas Near Banning

We run CGI service throughout the Pass and into the surrounding communities. If you’re in Banning service area territory, we’re already local. We also schedule CGI work in Cabazon, Beaumont, Cherry Valley, and Calimesa. For homeowners further out, we cover CGI service in Cabazon and CGI service in Hesperia through our expanded service area.

Book Your CGI Service in Banning Today

Get a straight answer on your CGI cabinets, countertops, or exterior trim. We’ll come out, look at your framing, talk through your options, and give you a written estimate. Call Rick and the team at (855) 473-6535 today, and we’ll schedule your free estimate in Banning.

Written by Rick Sondermann, Owner at Polaris Contractors, serving Banning since 2019.

Need Construction help in Banning? Licensed & insured · Written quotes before work starts response · free estimates
Call (855) 473-6535
Areas We Serve

Request a Free Estimate in Banning

Tell us what you need — Polaris Contractors responds fast. No obligation.

By submitting this form, you confirm you have read our Privacy Policy and consent to being contacted by call, text, or email concerning your request, including by the partner businesses that may perform the service.

Prefer to text? Text Us
Call Now - 24/7 Dispatch