Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Roofing
Windows & doors
Driveway & pavers
FenceFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
CWS Construction in Murrieta, CA | Polaris Contractors
We provide independent CWS cabinet service, refacing, and full kitchen remodeling across Murrieta, CA, and nearby communities including CWS repair in Murrieta Hot Springs. The one thing that makes our CWS work here different is that we know these 1980s and 1990s tract kitchens inside out, down to the thermofoil doors peeling on the bottom rail and the sink bases swollen from slab moisture. We’re Polaris Contractors, led by Rick Sondermann, and we handle CWS cabinetry the way Murrieta’s older homes actually need it handled. Call us at (855) 473-6535 for a free estimate.
Why Murrieta Residents Choose Us for CWS Service
Most contractors see a CWS kitchen and treat it like any other cabinet job. We don’t. Rick Sondermann spent almost three decades building and renovating homes along the Southern California coastline before bringing that same standard to inland Riverside County and Wildomar CWS service, and he’s pulled enough CWS Brookhaven and Maple thermofoil doors out of Murrieta tract homes to know exactly where they fail and why. We’re a full-scope general contractor, not a cabinet sub, which means when we find a slab that’s crept under your CWS sink base, we fix the floor, shim the run level, and rebuild the boxes so the doors close square. That’s the difference between patching a symptom and fixing the reason it happened. We carry OEM hinges, glides, and shelf hardware where CWS still supplies them, and we keep quality aftermarket equivalents on hand when a part’s been discontinued. Every recommendation we make comes from what we’ve watched work in Murrieta’s housing stock, not from a dealer quota.
Styles & brands we work with
Common CWS Construction Problems We Solve in Murrieta
- Peeling thermofoil and laminate door skins at the bottom rail. Murrieta’s dry inland Riverside County heat, combined with steam from dishwashers and ovens, cycles the adhesive on older CWS thermofoil until the skin lifts and delaminates. We see it most on the doors directly above or beside a cooktop. Reface or replace those doors, and the kitchen looks ten years newer.
- Swollen particleboard boxes at the toe kick and sink base. Many 1990s slab-on-grade homes in 92562 and 92563 have floors that wick moisture into the cabinet base. The particleboard swells, the toe kick bows, and the sink base gets soft. We replace the wet boxes with moisture-resistant material and shim everything level before the run racks further out of square.
- Drawer glides and hinges failing from unlevel cabinet runs. When a slab settles, the entire cabinet run can be nearly an inch out of level end to end. Drawers bind, hinges stress, and doors won’t close. We pull the run, shim and scribe it level, and install fresh glides so the drawers move properly.
- Faded and chalked finishes on east- and south-facing wall cabinets. Hard Murrieta afternoon sun through single-pane windows breaks down the finish on upper cabinet faces. What was once a warm maple tone turns chalky and dull. Refacing those uppers with a durable finish or new doors restores the kitchen without a full tear-out.
- Racked cabinet boxes from years of settlement. Riverside County’s clay-heavy soils move, and 20 to 40 year-old tract homes have often settled enough to twist the cabinet frames. That’s when doors start rubbing, gaps appear at the crown, and the run looks crooked. We rebuild the affected boxes and reinstall the run square.
CWS Service in Murrieta: What Local Conditions Mean for Your Equipment
Murrieta is largely built out, so nearly every kitchen we touch is second-generation work on a 20 to 40 year-old tract home. And the city’s HOAs require architectural review on visible exterior changes before the city permit is even pulled. That sequencing creates a bottleneck most homeowners don’t expect. If you’re doing a CWS kitchen remodel that involves moving a window, changing an exhaust vent, or altering an exterior wall, your HOA needs to approve the change first, and the City of Murrieta permit comes after. We sequence cabinet, countertop, and window or vent changes so the HOA approval and the city permit line up instead of one stalling the other. In a 1990s tract off the I-15 corridor in 92563 and CWS repair in Temecula, we opened a CWS kitchen with peeling thermofoil doors and found the sink base swollen from a slab that had crept, the cabinet run nearly an inch out of level end to end. We replaced the wet boxes, shimmed and scribed the new run level, refaced the sound uppers, and set a quartz top with a fresh backsplash, then matched the exhaust vent change to the HOA’s approved exterior finish before final inspection. That’s the kind of planning that keeps a Murrieta remodel from going idle for weeks.
CWS Models & Products We Service in Murrieta
We work on the CWS lines most common in Murrieta’s 1980s and 2000s subdivisions: Brookhaven and Wood-Mode-style semi-custom cabinetry, the Transitional Shaker and raised-panel door lines, Maple and thermofoil finish packages, and the CWS quartz and granite countertop collections. On a 25 year-old tract kitchen, we’ll match OEM hinges, glides, and shelf hardware where CWS still supplies them, and we’ll use a quality aftermarket equivalent when a discontinued part would otherwise force you into a full cabinet swap. If the carcass is sound, we reface or replace individual boxes and doors. We only push a full gut when the boxes are swollen, racked, or the layout itself is the problem. Our shop carries the common hardware and finish samples for fast Murrieta turnaround, so you’re not waiting weeks on a small parts order.
See the difference
Before
After
Before
After
Before
AfterCWS Service Pricing in Murrieta
What you’ll pay depends on whether you’re refacing a run of CWS cabinets, replacing a few swollen boxes, or doing a full kitchen remodel with quartz. Here are the ranges we work within for Murrieta homes:
| Service | Typical Range |
|---|---|
| Full Kitchen Remodel | $14,000 – $45,000 |
| Cabinet Installation | $4,000 – $13,000 |
| Countertop Installation | $2,000 – $6,500 |
| Backsplash Installation | $800 – $2,500 |
| Kitchen Island Installation | $3,000 – $10,000 |
A free estimate from us includes a look at the existing CWS cabinets, the slab condition, and the layout, so you get a written line-item quote before any work starts. Call (855) 473-6535 and we’ll come out to Murrieta at a time that works.
Serving Murrieta, CA — Our Local Coverage Area
We’re based in the Murrieta area and know this community well, including Sedco Hills CWS service. Use the map below to see our service coverage — if you’re nearby, we can almost certainly help.
FAQs – CWS Construction in Murrieta
HOA architectural review in Murrieta typically covers any change visible from the exterior: windows, exhaust vents, exterior doors, rooflines, and sometimes exterior wall finishes. If your CWS kitchen remodel touches any of those, the association needs to sign off before the City of Murrieta will issue the permit. We sequence the work so the HOA approval and city permit move together instead of one stalling the other. Call (855) 473-6535 and we’ll walk you through the order of approvals for your specific remodel.
That peeling is the thermofoil or laminate skin delaminating from the door substrate, usually at the bottom rail where heat and moisture accumulate. Murrieta’s hot, dry summers combined with dishwasher steam and slab moisture cause the adhesive to break down over 20 plus years. The fix is either refacing the affected doors and drawers or replacing the run with a more durable finish. We can tell you which route makes sense once we see the condition of the boxes.
Refacing is worth it if the cabinet boxes are square, dry, and still level. On many Murrieta tract kitchens, the boxes are sound and only the doors, drawer fronts, and hardware are tired. But if the particleboard is swollen at the sink base, the frames are racked from settlement, or the layout doesn’t work for the way you cook now, a full replacement is the better spend. We’ll walk you through what we see and give you both options in writing, including the cost difference.
Yes. We shim and scribe the cabinet run level before installing any countertop. On 1990s slabs that have settled or heaved, we sometimes need to float a small leveling bed under the island footprint or adjust the interior supports. A quartz top won’t crack if the cabinets beneath it are dead level and fully supported. Call (855) 473-6535 for a free estimate if you suspect your slab has moved.
Yes. We pull the City of Murrieta permit, coordinate inspections, and make sure the work passes before the project closes. For exterior portions of the remodel, we also help you prepare the HOA architectural submittal so the two tracks don’t collide. Everything is managed under one contract with our team.
Service Areas Near Murrieta
We also cover the surrounding communities of Anaheim, Cypress, Villa Park, Foothill Ranch, La Palma, and Ladera Ranch. If your CWS kitchen is out in those areas, take a look at our CWS service in Perris and CWS service in Fallbrook pages. Our main Murrieta service area page has the full coverage list. For everything CWS, start with CWS sales & service.
Book Your CWS Service in Murrieta Today
If your CWS cabinets are peeling, swelling, or sitting crooked on a settled slab, we can help. Call (855) 473-6535 to schedule your free estimate. We serve all of Murrieta, including 92562, 92563, and 92564.
Written by Rick Sondermann, Owner at Polaris Contractors, serving Murrieta and Southern California for nearly three decades.