Windows & doors
Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Roofing
Driveway & pavers
FenceFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
ES Windows Construction in Temecula, CA | Polaris Contractors
We provide independent ES Windows service across Temecula and Murrieta Hot Springs ES Windows service, from replacement sashes on 1980s tract homes to full multi-slide installs on 92590 estate lots. What makes our ES Windows work different here is that we understand the two things every Temecula project actually hinges on: HOA architectural review and stucco-set flange sealing that holds up to Santa Ana wind and inland valley sun. Call (855) 473-6535 for a free estimate.
We’re a full-scope general contractor, not a window specialty shop. That matters when a window replacement uncovers rotted framing, failed flashing, or stucco damage that needs proper repair before the new unit goes in. Rick Sondermann, our owner, learned the fundamentals at Saddleback College and has spent nearly three decades sequencing work so one trade doesn’t undo another. For Temecula homeowners, that means ES Windows glazing gets installed as part of a larger, coordinated exterior job when needed, or as a standalone replacement when that’s all the scope calls for. We’re an independent contractor and are not authorized, sponsored, or endorsed by ES Windows. Our loyalty is to the homeowner and the building, not a manufacturer’s program.
Why Temecula Residents Choose Us for ES Windows Service
Temecula’s housing stock is dominated by 1980s-2000s Mediterranean and Spanish-revival tract homes, stucco on wood frame, across Redhawk, Paloma del Sol, Paseo del Sol, Harveston, and Wolf Creek. We’ve opened enough of those walls to know how ES Windows units were originally set, flashed, and sealed, and where those assemblies fail after two decades of thermal cycling. Our team has installed and serviced ES Windows products across Temecula’s stucco tracts and 92590 hillside customs long enough to know how their frames, glass packages, and hardware behave under inland valley UV and Santa Ana wind loading. That knowledge comes from job sites, not a dealer badge. We stock the OEM glass, sash, roller, and lock hardware that keeps an existing ES unit serviceable, and when something’s discontinued, we spec equal-or-better aftermarket parts rated for this climate. Rick’s approach is simple: do it right the first time, the second time always costs more. That’s why we re-flash and re-seal rough openings instead of just swapping the sash and walking away.
Styles & brands we work with







Common ES Windows Construction Problems We Solve in Temecula
- Failed perimeter seals and degraded sealant on stucco-set frames. Temecula’s thermal cycling between intense summer sun and winter frost opens gaps that let wind-driven dust and Santa Ana gusts drive water past the flange. We pull the exterior trim, inspect the rough opening, and re-flash with sealant and flashing tape rated for this exposure before resetting the unit.
- Sun-baked vinyl frames and weatherstripping on west- and south-facing elevations. Unfiltered valley UV warps sashes, makes sweeps brittle, and leaves sliders hard to latch. On Redhawk and Wolf Creek homes with full afternoon exposure, this is the most common failure we see. New equal-or-better weatherstripping and sash realignment usually restores function without a full replacement.
- Fogged or seal-failed dual-pane IGUs on older ES units. Desiccant saturation shows as haze between the panes, most often on the sun-exposed side of the house. Once the IGU has failed, the fix is either reglazing with a matched Low-E dual-pane unit or full sash replacement, depending on frame condition. We’ll tell you honestly which one makes sense.
- Hardware and roller failure on large sliders and multi-slides. Worn rollers, misaligned tracks, and failed locks let Santa Ana wind events rattle and rack the panels on estate homes in 92592 and custom builds in 92590. We replace rollers and re-square tracks so the panel glides instead of grinding, and we upgrade lock hardware where wind load is a real concern.
- HOA compliance during replacement. In Harveston, Redhawk, and Wolf Creek, the window’s visible profile, frame color, and grid pattern must clear architectural review before a single unit is ordered. We handle that with the homeowner: we match the existing elevation, prepare the photo and spec package for the HOA, and order only after approval comes back. Waiting three weeks for approval beats buying 14 windows that get rejected.
ES Windows Service in Temecula: What Local Conditions Mean for Your Equipment
Here’s the thing about Temecula that most window contractors from outside the area don’t plan for: the city is largely built out. Most ES Windows work here is replacement and addition glazing, not new-construction fenestration, and in the HOA-governed villages of Redhawk, Harveston, and Wolf Creek, the window’s visible profile, frame color, and grid pattern must clear architectural review before a single unit gets ordered. That rule changes the sequencing of every job. We’ve seen homeowners buy windows first, then discover their HOA requires a specific grid pattern or frame profile that matches the original elevation, and now they’re sitting on 12 units they can’t install. It also means the permitting path runs through the city’s entitlement process, not just a simple over-the-counter window permit. When we quote ES Windows work in Temecula, we ask which village or HOA governs the property on the first call, because it determines what we can order and when. On a Paseo del Sol stucco-on-frame home, our crew opened up a sun-baked west wall where the original ES Windows sliders had warped sashes, failed rollers, and hazy dual-pane glass after two decades of valley UV. We re-flashed and re-sealed the rough openings, set new Low-E dual-pane ES-profile units with fresh rollers and locks, and stucco-patched the surrounds so the wall drained correctly ahead of the next Santa Ana event. That’s the difference between a window swap and a window job done for this climate.
ES Windows Models & Products We Service in Temecula
We service the ES Windows lines commonly found across Temecula’s housing stock: vinyl single-hung and slider replacement series in 1980s-2000s tracts, dual-pane Low-E fixed and casement units used on wine-country view walls and covered-patio openings, horizontal sliding and awning windows spec’d for outdoor kitchen and cabana enclosures, and multi-slide and large-format glass door systems on 92590 and 92592 estate homes. For repair work, we match ES Windows OEM glass, sash, roller, and lock hardware where it’s still available so the unit keeps its original profile and warranty-eligible components. When OEM parts are discontinued, we spec equal-or-better aftermarket glass and hardware rated for inland valley sun and wind. On sun- and wind-damaged units, we repair glazing and hardware first, and only recommend full replacement when the frame or IGU itself has failed. It’s the same philosophy we use across ES Windows sales & service: fix what’s serviceable, replace what isn’t, and never sell a full re-glaze when three sashes would do.
See the difference
Before
After
Before
After
Before
AfterES Windows Service Pricing in Temecula
| Service | Price Range |
|---|---|
| Window Replacement | $4,500 – $15,000 |
| Impact Window Installation | $8,000 – $25,000 |
| Home Addition | $45,000 – $130,000 |
A single-sash ES Windows replacement in a Temecula tract home sits at the low end of that window range. A full multi-slide or large-format glass package on an estate lot in 92592 lands higher, especially if stucco patch, re-flashing, and HOA submittal are part of the scope. What drives cost here: how much stucco and framing repair the opening needs once the old unit comes out, whether the HOA requires custom grid patterns or frame colors, and whether the existing rough opening was properly flashed to begin with. Every estimate is free and includes a written line-by-line breakdown so you see exactly what you’re paying for. Call (855) 473-6535 and we’ll walk the property together before quoting anything.
Serving Temecula, CA — Our Local Coverage Area
We’re based in the Temecula area and know this community well. Use the map below to see our service coverage — if you’re nearby, we can almost certainly help.
FAQs – ES Windows Construction in Temecula
My ES Windows dual-pane glass is fogging between the panes – do I need all-new windows? No. If the frame and hardware are in good shape, you need the failed IGU reglazed or the sash replaced, not a full window teardown. We’ll assess the sun exposure and frame condition and tell you straight whether reglazing or replacement makes more financial sense. Call (855) 473-6535 for an exact quote – estimates are free.
Will new ES Windows units pass my Temecula HOA architectural review? Almost always, if we match the original profile, frame color, and grid pattern and submit the proper spec package before ordering. We’ve handled HOA submittals in Redhawk, Harveston, and Wolf Creek and know what the review boards look for. If a different product would get approved faster or look better, we’ll tell you that before you spend a dollar.
Do Santa Ana winds actually damage ES Windows sliders and multi-slides in Temecula? They do, particularly on larger panels with worn rollers or misaligned tracks. Wind-driven dust and sustained gusts rattle the panels, accelerate roller wear, and in extreme cases rack the frame enough to break the latch. Homes on exposed ridgelines and east-west orientations see it most. We can upgrade roller and lock hardware where wind load is a real concern.
How does Temecula’s sun and frost cycle affect ES Windows vinyl frames? The thermal swing between summer afternoon heat and winter overnight frost expands and contracts the vinyl and the sealant around it. Over a decade or two, that cycling opens small gaps in the perimeter seal, which lets water and dust behind the flange. Sun-facing walls degrade faster. The fix is re-flashing and re-sealing when we set the replacement unit.
We’re adding a covered patio or ADU in 92590 – can ES Windows glazing be matched to the existing house? Yes. We match the existing ES window profile, frame color, and grid pattern so the addition reads as part of the original structure. That matters both for HOA approval and for resale. If the existing line is discontinued, we’ll spec a current ES product that matches visually and performs to this climate. Call (855) 473-6535 and we’ll take a look at what’s on the house now.
Service Areas Near Temecula
Polaris Contractors also serves homeowners throughout the surrounding region. If your project is in Temecula service area or just over the county line, we can help. We’re currently taking on ES Windows work in Anaheim, Cypress, Villa Park, Foothill Ranch, La Palma, and Ladera Ranch, as well as ES Windows service in Rialto and ES Windows service in Nuevo.
Book Your ES Windows Service in Temecula Today
If your ES Windows are fogged, sun-baked, hard to latch, or failing at the stucco line, call (855) 473-6535 and we’ll set up a free on-site estimate. Rick Sondermann built Polaris Contractors on doing it right the first time because the second time always costs more. One call gets you a straight assessment and a written number.
Written by Rick Sondermann, Owner at Polaris Contractors, serving Temecula since day one.