Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Roofing
Windows & doors
Driveway & pavers
FenceFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Mr-Glass Construction in Wrightwood, CA | Polaris Contractors
We’re Polaris Contractors, an independent Mr-Glass service provider working throughout Wrightwood, CA (92397), and offering San Antonio Heights Mr-Glass service as well. We install, repair, and replace Mr-Glass frameless sliding shower doors, semi-frameless pivots, and custom tempered glass panels in mountain homes where freeze-thaw cycles and snow-load structural realities stress every opening. That’s the thing that separates our Mr-Glass work here from flat-lot work down the hill: we measure against walls that move with the seasons. Call us at (855) 473-6535 for a free estimate on any Mr-Glass enclosure in Wrightwood.
Why Wrightwood Residents Choose Us for Mr-Glass Service
Rick Sondermann started Polaris Contractors with a simple rule: do it right the first time, the second time always costs more. That thinking carries straight into how we handle Mr-Glass enclosures up here. Wrightwood homeowners don’t want a crew that treats a shower door like a generic glass install. They want someone who knows that a Mr-Glass semi-frameless pivot enclosure on a pier-and-post cabin east of Highway 2 behaves differently than the same unit in a slab-on-grade tract home in Rancho Cucamonga or Mr-Glass in Phelan. We read Mr-Glass fabrication specs before we touch the frame. We field-measure every opening because mountain walls are rarely plumb or square. And when factory hinges and seals are still available, we use them. When they aren’t, we’re honest about what aftermarket hardware will actually hold up through a Wrightwood winter. That’s the kind of straight answer people up here appreciate, and it’s why neighbors keep passing our number around. One crew, full scope, from a shower enclosure reseal to a full bathroom remodel.
Styles & brands we work with
Common Mr-Glass Construction Problems We Solve in Wrightwood
- Freeze-thaw pivot sag. At 6,000 feet, repeated freezes and thaws work Mr-Glass factory hinges and pivot points loose within two or three winters. Doors start to drag on the curb, then they bind. We reset pivot bushings, replace worn seals, and re-hang the door so it swings clean. Fixing this before the glass cracks against the curb is far cheaper than a full panel replacement.
- Etched and clouded glass from condensation. Older Wrightwood cabins often have single-pane windows and no bathroom exhaust fan. Big temperature swings between a hot shower and a cold mountain morning put heavy condensation on uncoated Mr-Glass panels, and mineral buildup from Wrightwood’s well water etches the surface. We can often restore clarity with the right cleaning protocol, and where etching is too deep, we spec replacement tempered glass.
- Racked frames from pier-and-post settling. Many Wrightwood homes on raised foundations shift enough during snow melt that shower enclosures go out of square. Panels stop meeting at the corners, seals weep, and water finds the subfloor. We re-shim the frame to the actual wall plane and re-caulk with flexible sealant rated for the temperature swing here. That’s often the difference between a reseal and a full rip-out.
- WUI heat-warped frame finishes. On homes with south- and west-facing walls close to the forest edge, ember-driven exterior heat during fire events can discolor or warp exposed Mr-Glass frame finishes. We inspect for that kind of damage specifically on Wrightwood jobs, because most glass contractors working down in the Victor Valley never look for it.
- Ice-dam water intrusion around bathroom exterior walls. Snow buildup against a bathroom wall can melt and refreeze, driving moisture into the wall cavity behind a shower enclosure. The glass looks fine, but the channel seal is quietly failing. We check the full perimeter, not just the visible seam.
Mr-Glass Service in Wrightwood: What Local Conditions Mean for Your Equipment
Wrightwood sits in the San Gabriel Mountains under San Bernardino County jurisdiction, which means roofs and walls here are engineered for genuine snow load, not the near-zero loads used down in Hesperia or Victorville. That has a direct effect on bathroom enclosures. The building assembly is heavier and stiffer, so when the structure settles or flexes with snow melt and freeze-thaw, that stress doesn’t dissipate through the walls the way it would in a lighter, more flexible down-the-hill build. It transfers straight into whatever is rigidly mounted: your Mr-Glass frame. Off Lone Pine Canyon Road and along the steeper lots off Highway 2, we regularly see enclosures where the top rail has pulled slightly from a tile surface or the curb channel has lifted at one end, not because the glass failed, but because the house moved and the enclosure couldn’t, a pattern we also watch for with Mr-Glass in Oak Hills. A flat-lot glass contractor will caulk over the gap and call it done. We read that as a structural clue and address the connection before we re-hang the glass. That’s the kind of local knowledge you only get from working Mr-Glass enclosures in Wrightwood year after year.
Mr-Glass Models & Products We Service in Wrightwood
We work on Mr-Glass frameless sliding shower door systems, semi-frameless pivot shower enclosures, and custom-cut tempered glass panels for chalet and A-frame baths, the two housing styles that dominate Wrightwood’s older stock. For recent Mr-Glass units, we source genuine Mr-Glass hinges, seals, and channels so the hardware matches what the manufacturer specified. For older enclosures where factory parts are discontinued, we spec quality aftermarket tempered glass and marine-grade hardware, and we’ll tell you plainly whether a reseal and rehang will outlast a full replacement. We stock common channel profiles, bottom seals, and pivot bushings suited to Wrightwood’s temperature swings so we’re not waiting on a parts order from down the hill. For the broader picture of what we offer, see our Mr-Glass sales & service page.
See the difference
Before
After
Before
After
Before
AfterMr-Glass Service Pricing in Wrightwood
Here’s what Mr-Glass-related shower work typically runs in the Wrightwood market. These ranges reflect the extra labor that mountain conditions add: steeper access, out-of-plumb walls, and the need for flexible sealants and marine-grade hardware that flat-lot jobs don’t require.
| Service | Typical Wrightwood Price Range |
|---|---|
| Walk-In Shower Installation | $4,500 – $12,000 |
| Shower Replacement | $3,000 – $8,500 |
| Tub-to-Shower Conversion | $3,500 – $10,000 |
| Tile & Fixtures (bath) | $5,000 – $12,000 |
Where your job lands in these ranges depends on glass panel size, whether the frame can be reused, and how far out of square the existing opening is. Every estimate from us is free and includes exact measurements on site, not numbers from a photo. Call (855) 473-6535 and we’ll put a real number on it.
Serving Wrightwood, CA — Our Local Coverage Area
We’re based in the Wrightwood area and know this community well, and we also provide Piñon Hills Mr-Glass service. Use the map below to see our service coverage — if you’re nearby, we can almost certainly help.
FAQs – Mr-Glass Construction in Wrightwood
No. We’re an independent Mr-Glass service provider operating as Polaris Contractors, a licensed general contractor. We are not manufacturer-affiliated or factory-authorized. What that means for you is honest, spec-driven work, we recommend genuine Mr-Glass parts when they’re available and the right aftermarket hardware when they’re not, and we never pretend otherwise.
Yes, in most cases we can. A leaking enclosure is usually a worn bottom seal, a racked frame, failed caulk joints, or a pivot that’s sagged out of alignment, all of which are repairable without replacing the glass. We’ll tell you straight if the frame itself is compromised to the point that a repair won’t last through another Wrightwood winter. Call (855) 473-6535 and we’ll assess it in person.
Both, depending on what the enclosure needs and what’s still manufactured. For newer Mr-Glass enclosures, we source genuine Mr-Glass hinges, seals, and channels. For older units where factory parts are discontinued, we use marine-grade aftermarket hardware and quality tempered glass. We’ll show you the options and explain what holds up best at 6,000 feet before we order anything.
A reseal, rehang, or pivot rebuild typically takes one working day. A full shower enclosure replacement usually runs two to three days, depending on glass fabrication lead time and how much tile or curb repair is needed once the old frame comes out. Mountain access and winter weather can shift schedules, and we tell you that up front rather than promising a date we can’t hold.
A shower replacement in Wrightwood typically runs $3,000 to $8,500, while a full walk-in installation ranges from $4,500 to $12,000. A repair like a pivot reset or reseal falls on the low end of those ranges and sometimes well below. The only way to know your exact number is a site measurement, which is free. Call (855) 473-6535 for a precise quote.
Service Areas Near Wrightwood
Beyond Wrightwood, we serve mountain and foothill communities across the San Gabriel range and down into the Inland Empire corridor. That includes homes in Wrightwood service area, plus nearby markets like Mr-Glass service in Highland and Mr-Glass service in Mentone, along with Anaheim, Cypress, Villa Park, Foothill Ranch, and Ladera Ranch for clients managing properties in multiple locations.
Book Your Mr-Glass Service in Wrightwood Today
If your Mr-Glass enclosure is sagging, leaking, or showing clouded glass, don’t wait for the next freeze-thaw cycle to make it worse. Call Polaris Contractors at (855) 473-6535 for a free, exact on-site estimate. We’ll measure the opening, check the frame, and tell you what it actually needs.
Written by Rick Sondermann, Owner at Polaris Contractors, serving Wrightwood and the San Gabriel Mountains since 1995.