Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Roofing
Windows & doors
Driveway & pavers
FenceFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Jerith Construction in Anaheim, CA | Polaris Contractors
We provide independent Jerith aluminum fence installation, repair, and re-racking service across Anaheim – from flat 1950s slab lots in 92801 to engineered hillside properties in 92807 and 92808 – and also offer Fullerton Jerith service to nearby communities. What separates our Jerith work here is that we’ve done it on both sides of the 91, where a fence can anchor into a plain concrete slab on one job and require compaction reports and caisson-aware post footings on the next. We’re not affiliated with Jerith and we don’t pretend to be – we’re the crew that fixes and installs their product correctly for this city’s specific ground conditions. Call (855) 473-6535 to schedule a free estimate.
Why Anaheim Residents Choose Us for Jerith Service
Jerith ornamental aluminum fencing is a common sight in Anaheim backyards, school perimeters, and pool enclosures – but the install and repair approach changes block by block. A full-sun west-side lot off Euclid can bake a powder coat to a dull chalk in five years. An Anaheim Hills canyon-edge property off Nohl Ranch Road has slope movement, fill soil, and Santa Ana wind shear working against every post. We’re familiar with both worlds, and we also provide Placentia Jerith service with the same fast turnaround. We stock Jerith OEM replacement pickets, rails, hinge sets, and post caps rather than making you wait on a long lead time.
Rick Sondermann, our owner, grew up in Corona del Mar and studied building technology at Saddleback College before spending nearly three decades renovating coastal and inland homes. He’s seen what happens when fence posts go in at “good enough” depth and what happens ten years later when they don’t. Do it right the first time – the second time always costs more.
We also bring a full-scope contractor’s eye to every Jerith job. When we’re re-racking a fence along a side yard that’s part of a larger backyard remodel, we can coordinate the Jerith sales & service with paver driveway work, hardscaping, or a home addition under one agreement – instead of you juggling three separate bids.
Styles & brands we work with
Common Jerith Construction Problems We Solve in Anaheim
- Powder-coat chalking and fade on west-side slab lots. In 92801, 92804, and 92805, Jerith panels facing full afternoon sun against 1950s stucco-lot reflected heat can lose their gloss in a few years. Homeowners sometimes assume the dull finish is rust – it’s usually UV degradation of the powder coat. We clean, touch-up match Jerith factory colors, and re-coat where panels are still structurally sound.
- Racked panels and dragging gates on Anaheim Hills slopes. This is the single most common Jerith repair call we get from 92807 and 92808. Panels go out of plumb when posts were set shallow or in un-compacted fill above retaining walls. Gates then drag on concrete and hinge screws pull free. Re-racking a sound Jerith panel and resetting posts to proper depth with new footings solves it.
- Santa Ana wind damage – bent pickets and hinge-side sag. Canyon-edge lots and exposed ridge lines subject Jerith gates to sustained wind loading that most installs never planned for. Bent pickets, hinge sag, and loose post caps send gates out of alignment. We brace and reset gates with proper concrete footings and upgrade to heavier hinge sets.
- Corrosion at cut ends, bottom rails, and post bases. Sprinkler overspray and hillside drainage running along the base of a Jerith run can cause field-cut aluminum edges to bleed oxide. We touch-up cut ends and replace bottom rails when oxidation has gone too deep to re-coat.
- Pool-code compliance retrofits on west-side backyards. Jerith’s Barrington and Regent lines are designed for pool-code applications, but older Anaheim pool fences may predate current self-closing hinge and drop-rod requirements. We retrofit existing Jerith runs with compliant hardware.
Jerith Service in Anaheim: What Local Conditions Mean for Your Equipment
Anaheim is one of the few cities where a Jerith job can be a flat west-side pool-code fence around a 1950s slab backyard in 92801, 92804, or 92805 – or a racked panel on a caisson-and-retaining-wall hillside lot above the Santa Ana River canyon edge in 92807 or 92808. The footing engineering changes, not the fence. That means a single install here can need a compaction report on one side of the 91 and nothing more than a slab anchor on the other. On an Anaheim Hills canyon-edge lot off Nohl Ranch Road, our crew pulled a Jerith Reliance run along a rear property line where several panels had racked out of plumb and the yard gate was dragging on the slope-side concrete. We found posts set in shallow un-compacted fill above the retaining wall. We reset the bases to proper depth with concrete footings, re-racked the sound OEM panels, replaced two bent pickets, and swapped in self-closing hinges and a drop rod – the gate swings clean now and the run follows the slope plumb. That’s the two-world nature of Anaheim we deal with on Jerith jobs, and it’s why we don’t treat a fence as a one-size-fits-all install.
Jerith Models & Products We Service in Anaheim
We service the Jerith Reliance series rackable aluminum fence, the Majestic series ornamental aluminum fence, the Barrington and Regent aluminum pool-code fencing lines, and Jerith aluminum yard and walk gates with self-closing hinges. For a continuous run where profile matching matters, we use Jerith OEM replacement pickets, rails, hinge sets, and post caps. Where a component is functionally the weak point – self-closing hinges, drop rods, latches – we recommend premium aftermarket hardware that holds up better to Anaheim’s wind and sun. We’ll tell you honestly whether a bent section should be re-set or replaced. Re-racking a sound Jerith panel costs less than a new run. Corroded bottom rails and failing posts get replaced, not patched.
See the difference
Before
After
Before
After
Before
AfterJerith Service Pricing in Anaheim
What you’ll pay depends on what you’re doing. A full new Jerith aluminum fence install in Anaheim runs $4,000 – $10,000. If the fence work is part of a larger project – say a paver driveway install at $7,000 – $18,000 or a home addition at $45,000 – $130,000 – we can coordinate everything under one agreement as your General Contractor – Anaheim so the sequencing doesn’t cause rework. Our free estimates include a line-item quote, not a vague number. Call (855) 473-6535 for an exact quote on your property.
| Service | Price Range |
|---|---|
| Aluminum Fence Installation | $4,000 – $10,000 |
| Paver Driveway Installation | $7,000 – $18,000 |
| Home Addition | $45,000 – $130,000 |
Serving Anaheim, CA — Our Local Coverage Area
We’re based in the Anaheim area and know this community well. Use the map below to see our service coverage — if you’re nearby, we can almost certainly help.
FAQs – Jerith Construction in Anaheim
Yes. Jerith’s Barrington and Regent aluminum pool-code lines are designed for exactly this application, and we retrofit older Jerith runs with self-closing hinges, drop rods, and latch hardware that meet current Anaheim pool enclosure standards. Your west-side lot in 92801, 92804, or 92805 probably sits flat on slab, so the retrofit is often simpler than homeowners expect. Call (855) 473-6535 and we’ll assess your existing run.
Racked panels on slope lots in 92807 or 92808 almost always trace back to post depth – either the posts were set shallow or the original installer drove them into un-compacted fill above a retaining wall. Once the slope settles or the fill shifts, panels go out of plumb and gates drag. We reset bases to proper depth with concrete footings and re-rack the sound OEM panels.
Santa Ana wind events put sustained lateral load on gates and long runs, especially on exposed canyon-edge lots in Anaheim Hills. Gates that weren’t braced or set in proper concrete footings sag at the hinge side and pickets bend. We inspect the hinge hardware and post footings, then reset and brace to handle the wind load instead of just straightening what bent.
Usually not. The dull, chalky finish on a west-side Anaheim Jerith fence is UV degradation of the powder coat, not rust – aluminum doesn’t rust. Full afternoon sun and reflected heat from 1950s stucco lots accelerate chalking. We can clean, touch-up, and re-coat panels that are still structurally sound. Call (855) 473-6535 for a finish assessment.
Yes, and it’s actually smart to do it then. During a garage conversion or home addition in Anaheim, we can re-rack or re-set your existing Jerith panels, adjust post lines to the new structure, and coordinate the fencing with the construction sequencing – rather than tearing out a sound fence later because no one planned for it.
Service Areas Near Anaheim
Our Jerith service covers all of Anaheim service area, plus nearby communities. We regularly work in Jerith service in Cypress, Jerith service in Villa Park, La Palma, and across the surrounding North Orange County corridor.
Book Your Jerith Service in Anaheim Today
If your Jerith fence is racked, sagging, faded, or just showing its age, call (855) 473-6535 for a free estimate. We’ll inspect it, tell you straight whether it’s re-set or replace, and quote it line by line.
Written by Rick Sondermann, Owner at Polaris Contractors, serving Anaheim since 1997.