Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Roofing
Windows & doors
Driveway & pavers
FenceFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Tremron Construction in Norco, CA | Polaris Contractors
We’re Polaris Contractors, and we install and service Tremron paver systems across Norco’s large-lot residential properties and nearby communities like Tremron repair in Home Gardens. We’re an independent contractor, not a Tremron authorized dealer, but our crews lay these pavers often enough to know exactly how each line holds up under Inland Empire heat and Santa Ana wind. Call (855) 473-6535 for a free estimate on Tremron paver installation, repair, or base rework anywhere in Norco’s 92860 zip code.
Why Norco Residents Choose Us for Tremron Service
Norco isn’t a tract-home city. Here, a paver job often means a barn apron, a trailer approach, or an arena-side patio, not just a backyard walkway. That changes how we spec the base, how we choose the joint sand, and how we set the edge restraints. We’ve been doing this long enough that Rick Sondermann, our owner, can walk a property and tell you whether the existing base was ever compacted for trailer loads or just for foot traffic. He grew up around construction, learned estimating and building technology hands-on, and spent nearly three decades renovating homes before building Polaris around one idea: one team, full scope, from the roof down to the pavers.
When you hire us for Tremron work in Norco, you’re not getting a specialty paver sub who disappears after the last stone is laid. You get our General Contractor in Norco who also handles the grading, the drainage, the fencing, and the structure that sits next to the pavers. That matters on horse properties where the paved approach has to clear setback lines and shed water away from corral posts.
Styles & brands we work with







Common Tremron Construction Problems We Solve in Norco
Here’s what we see most often on Tremron paver installations around Norco, and what’s usually behind it:
- Joint-sand loss and edge spalling on horse-property aprons. Hoof traffic beats on paver joints, and Norco’s wind-blown dust works its way into the gaps. Once the polymeric sand is gone, edges start chipping. We routinely re-sand and re-set edge courses on barn aprons that were installed years ago and never maintained.
- Efflorescence and mottled color on gray-blend pavers near tack rooms and wash racks. Sprinkler overspray with hard Inland Empire water leaves mineral deposits that turn gray blends blotchy. We see it most on run-in shed pads and wash-rack aprons. Cleaning helps, but the long-term fix is adjusting the spray pattern and sealing the surface.
- Rutting and edge slumping on driveway approaches. Half-acre-plus lots mean trucks, trailers, and equipment. If the base wasn’t compacted in lifts to spec, the pavers sink under repeated loads. We pull the failing section, re-compact properly, and re-lay with the right edge restraint.
- Fading and chalking on colored pavers exposed to full sun. Santa Ana wind-driven grit acts like sandpaper on fully exposed arena-side patios. Tremron pavers hold color better than many brands, but any paver will chalk over time in this corridor. We replace faded runs and match the existing profile so the repair doesn’t look like an afterthought.
- Pooling water washing out joints on barn and corral approaches. Norco’s animal-keeping zoning means many paved areas slope toward drainage swales that were never re-graded after the original install. When water sits, joints fail. We re-set the grade and re-sand.
Tremron Service in Norco: What Local Conditions Mean for Your Equipment
Norco’s rural-agricultural zoning and Animal Keeping Ordinance change paver work in a way a contractor from Anaheim or Tremron repair in Corona wouldn’t anticipate. Barns, corrals, tack rooms, and arenas all have setback requirements, and those setbacks dictate where a driveway or apron can legally sit. A paved trailer approach that crosses a setback line becomes a code problem, not just a design choice. We lay paver runs with those setbacks and the required drainage paths planned in from the first stake-out, so the approach clears the corral and moves water away from the structure. On a recent job on a rural-residential street off the main equestrian corridor, we re-laid a Tremron Olde Towne barn apron that had rutted under trailer loads. The old base was under-compacted and the edge course had slumped into the drainage swale. We pulled it, re-compacted in lifts, set hidden edge restraints at the correct setback, and re-laid with fresh polymeric sand. That apron now handles a loaded horse trailer and drains without washing out the joints. A contractor used to tract-home lot lines wouldn’t have caught the setback issue until the inspector did.
Tremron Models & Products We Service in Norco
We work with the Tremron lines that show up most often on Norco’s residential and horse properties: Olde Towne for tumbled, colonial-style driveways and barn aprons; Metropolitan and Manhattan for large-format, clean-lined patios and walkways that suit newer custom builds; and Stonegate for textured, high-relief surfaces where slip resistance matters around wash racks and arena approaches. For repairs, we stay with Tremron’s own matching pavers and the manufacturer-recommended polymeric joint sand and edge restraints so the fix blends with the existing color and profile. If a color has been discontinued and a true match isn’t possible, we say so and quote a re-lay of that section rather than patching with something that will always show. Repair is usually the right call for joint loss or single-course edge damage. Widespread rutting or a failed base means replacement, and we’ll tell you which one your property actually needs.
See the difference
Before
After
Before
After
Before
AfterTremron Service Pricing in Norco
What drives the cost on a Norco Tremron job is the same thing that drives it everywhere in the Inland Empire: the size of the area, the condition of the existing base, and whether we’re repairing a failing section or starting fresh. Here’s what you can expect:
| Service | Typical Price Range |
|---|---|
| Paver Driveway Installation | $7,000 – $18,000 |
| Paver Patio Installation | $3,500 – $11,000 |
| Driveway Replacement | $5,000 – $14,000 |
| Driveway Sealing | $250 – $700 |
A free estimate from us includes an on-site look at your base, your setback lines, and your drainage. Call (855) 473-6535 to schedule yours, and we’ll give you a written line-item quote before any work starts.
Serving Norco, CA — Our Local Coverage Area
We’re based in the Norco area and know this community well. Use the map below to see our service coverage — if you’re nearby, we can almost certainly help.
FAQs – Tremron Construction in Norco
A paver driveway in Norco typically runs $7,000 to $18,000 depending on square footage, base condition, and whether it needs to handle trailer loads. A paver patio is generally $3,500 to $11,000. The biggest cost variable on Norco horse properties is the base; if we have to re-compact or rebuild it for heavier loads, that adds to the total. Call (855) 473-6535 for an exact quote, the estimate is free.
No. We’re an independent general contractor who installs and services Tremron products regularly. We’re not manufacturer-affiliated, and we don’t claim any authorization. What we bring is working familiarity with Tremron’s product lines and how they perform on Norco’s rural-residential lots.
Yes. On repairs, we source matching Tremron pavers and use the manufacturer-recommended polymeric joint sand and edge restraints. If a color has been discontinued, we’ll tell you honestly and quote a re-lay of the affected area rather than patching with something that won’t match.
Most joint re-sanding and single-course edge repairs take a day or two. A driveway or barn apron re-lay with base re-compaction usually runs three to five days depending on square footage and weather. We’ll give you a schedule before we start and stick to it.
The lines we handle most in Norco are Olde Towne, Metropolitan, Manhattan, and Stonegate. Olde Towne shows up most on equestrian properties and ranch-style homes, while Metropolitan and Manhattan are common on newer custom builds with cleaner architectural lines.
Service Areas Near Norco
We work throughout Norco and the surrounding Inland Empire communities, including Tremron service in Eastvale, Tremron service in Pomona, plus Anaheim, Cypress, and Villa Park. If your property sits on a large lot with horse structures or a long driveway approach, you’re in the kind of ground we know well. Our full Norco service area covers the 92860 zip and the unincorporated pockets around it.
And if you’re looking more broadly at what we do with the brand, our Tremron sales & service page covers the full range of products and repair approaches we offer across the region.
Book Your Tremron Service in Norco Today
If your Norco driveway, barn apron, or patio is showing joint loss, rutting, or faded color, let’s talk. Call (855) 473-6535 to schedule a free estimate. We’ll walk the property, check the base and the setbacks, and tell you exactly what needs to happen.
Written by Rick Sondermann, Owner at Polaris Contractors, serving Norco’s rural-residential and equestrian properties with Tremron paver installation and repair. Do it right the first time, the second time always costs more.