Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Roofing
Windows & doors
Driveway & pavers
FenceFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
KraftMaid Construction in Placentia, CA | Polaris Contractors
We’re Polaris Contractors, and we provide independent KraftMaid cabinet installation, refacing, and repair across Placentia. What sets our KraftMaid work apart here is simple: we’ve spent years servicing cabinets inside Placentia’s 1950s – 70s tract homes, where slab foundations, Santa Ana heat, and out-of-plumb walls create failure patterns you won’t see in newer subdivisions. We know which KraftMaid lines hold up in these houses and which ones need extra attention. Call (855) 473-6535 to schedule a free estimate, and we’ll walk you through what your kitchen actually needs.
Why Placentia Residents Choose Us for KraftMaid Service
Most contractors in Placentia can order KraftMaid boxes. Far fewer understand how KraftMaid’s semi-custom sizing and finish options behave inside a 1962 galley kitchen with original plumbing and walls that haven’t been square since Eisenhower was in office. We’ve worked on KraftMaid Vantage, Deluxe, Prelude, and Synergy lines in homes throughout 92870 and 92871, and we’ve learned which hinge, drawer, and finish failure modes show up most often in this specific housing stock. Homeowners looking for KraftMaid repair in Brea face similar challenges with aging tract-home infrastructure. We’re not manufacturer-affiliated or authorized, and that’s the point. When a hinge sags or a thermofoil door starts peeling, we give you the honest repair-versus-replace call based on what’s actually in front of us, not what a corporate warranty flowchart says. Rick Sondermann, our owner, got his start in construction because his father was a finish carpenter who believed in doing things once and doing them right. That’s the standard we bring to every KraftMaid installation and repair we touch in Placentia.
We’re also a full-scope general contractor, which matters more than people expect. Kitchen work in Placentia rarely stays contained to cabinets. Walls get opened, plumbing gets relocated, electrical panels need upgrades. Rather than you coordinating a cabinet installer, an electrician, and a plumber, we handle the whole scope under one contract. One team, full scope. You call one number, and the whole project moves together.
Styles & brands we work with
Common KraftMaid Construction Problems We Solve in Placentia
- Swollen particleboard boxes at the toe kick and sink base. Placentia’s 1950s – 70s homes sit on slab-on-grade foundations. When a slow sink leak drips onto a slab floor, the moisture wicks straight up into the cabinet box. We see this constantly in original KraftMaid installs throughout the older core of 92870. The fix is usually a new sink base and adjacent boxes, matched to the existing finish.
- Thermofoil door delamination on Vantage and Deluxe lines. Placentia’s Santa Ana winds bring months of hot, dry air. In kitchens without air conditioning or with minimal insulation, decades of heat cycling cause the thermofoil layer to separate from the MDF core, especially on doors near ovens and south-facing windows. We replace or reface those doors with heat-resistant materials that hold up better.
- Drawer glide failure and hinge sag on 1990s – 2000s KraftMaid installs. Seasonal expansion and contraction in Placentia’s semi-arid climate works drawer glides and hinges loose over time. Original side-mount glides wear out, and doors start catching or sitting crooked. We install OEM replacement glides when the boxes are sound, or upgrade to aftermarket soft-close hardware when OEM parts are discontinued or priced unreasonably.
- Face frame separation and finish cracking around sink and dishwasher openings. In 1960s tract homes, walls weren’t framed to 2025 tolerances. When KraftMaid cabinets get fastened to out-of-plumb studs, stress concentrates at the face frame joints. Cracks and separation around sink and dishwasher openings are common. We shim, reinforce, and re-secure the frame before finish work starts.
- Layout changes that trigger foundation and setback issues. This is the Placentia-specific one. Moving a wall in a slab-on-grade house from 1963 often means foundation work and a setback variance from the city. We’ve learned to design KraftMaid kitchen updates that stay within the original footprint whenever possible, which saves you months of permitting time and thousands of dollars.
KraftMaid Service in Placentia: What Local Conditions Mean for Your Equipment
Placentia is a largely built-out city in North Orange County. There’s no meaningful greenfield development happening here. The construction trade in Placentia is remodeling, rebuilding, and working around what’s already in place. Most of the housing stock in 92870 and 92871 was built between the 1950s and 1970s as single-story tract homes on small lots, much like the properties that keep Anaheim KraftMaid service crews busy with mid-century kitchen updates. Those homes came with slab-on-grade foundations, shallow lot setbacks, detached garages, and kitchens sized for a different era of family life. When you’re updating KraftMaid cabinets in one of these houses, the work runs straight into the city’s older infrastructure. We’ve worked in the older tract neighborhoods around Bradford Avenue, where homes from the early 1960s still have original galvanized plumbing and undersized electrical panels. A kitchen remodel there isn’t just cabinet installation. It’s plumbing upgrades, electrical work, and often seismic retrofitting – all managed under one contract by one team. That’s the reality of KraftMaid work in Placentia, and it’s why we plan every project around the house as a whole, not just the cabinet order.
One project sticks with us. A homeowner on the 500 block of Bradford Avenue in Placentia had a 1962 galley kitchen with original KraftMaid Vantage cabinets that were delaminating at the sink base and had swollen toe kicks from a slow leak. We replaced the sink base and damaged boxes with matching Vantage components, installed new OEM hinges and aftermarket soft-close glides, and refaced the remaining doors with a heat-resistant thermofoil to handle the Santa Ana heat. The project stayed within the original footprint, avoiding the setback variance that a wall move would have triggered. That’s the kind of sequencing and material judgment that comes from working specifically in Placentia, not from a generic installation checklist.
KraftMaid Models & Products We Service in Placentia
We install and service all four main KraftMaid lines: Vantage, Deluxe, Prelude, and Synergy. Vantage is the line we see most often in Placentia’s original mid-century remodels and 1990s-era updates. Deluxe and Prelude show up in a lot of the townhome and infill construction near the 92870/92871 core, and we see the same patterns in Fullerton KraftMaid service calls. Synergy is the current semi-custom line for full-gut remodels. Our parts approach is straightforward: we source OEM KraftMaid hinges, drawer glides, and touch-up finish when the cabinet box is structurally sound and the parts are still available. When OEM parts are discontinued or cost-prohibitive, we switch to high-quality aftermarket soft-close hardware from reputable suppliers. We give you the honest call: refinishing or re-facing makes sense when boxes are dry and square. If water damage has compromised the particleboard core, full replacement is the only move that won’t fail in five years. We also guide you through countertop and backsplash selections that pair well with KraftMaid cabinetry, drawing from our access to 50+ vetted brands including Cambria, Silestone, Kohler, and Grohe. We’ll guide you to the right material, not bury you in a showroom book.
See the difference
Before
After
Before
After
Before
AfterKraftMaid Service Pricing in Placentia
What you’ll pay for KraftMaid work in Placentia depends on whether we’re installing new boxes, refacing existing cabinets, or replacing water-damaged components. Here’s the current range for the work we do most often:
| Service | Price Range |
|---|---|
| Cabinet Installation | $4,000 – $13,000 |
| Countertop Installation | $2,000 – $6,500 |
| Backsplash Installation | $800 – $2,500 |
| Full Kitchen Remodeling | $14,000 – $45,000 |
Those numbers shift based on whether we’re working inside the original footprint, what condition the existing boxes are in, and whether the project triggers plumbing or electrical upgrades. A free estimate from us means we walk the site, measure, and hand you a written line-item quote before any work starts. Call (855) 473-6535 to schedule yours.
Serving Placentia, CA — Our Local Coverage Area
We’re based in the Placentia area and know this community well. Use the map below to see our service coverage — if you’re nearby, we can almost certainly help.
FAQs – KraftMaid Construction in Placentia
Yes, in most cases we can match your existing KraftMaid Vantage finish, though the age and sun exposure of your current cabinets matters. Placentia’s intense summer sun fades finishes over time, so we order the factory finish and then tint-matched touch-up product if needed to blend the new boxes with the old. A color-match sample gets approved before we place the order. Call (855) 473-6535 and we’ll take a look.
Yes, new KraftMaid cabinets can be installed on wavy walls without tearing everything out. We shim the boxes to plumb and level, then scribe the filler strips and crown to follow the wall contours. Placentia’s 1960s tract homes rarely have straight walls, so this is standard procedure for our crew. The key is taking the time to shim correctly at installation, not trying to force the cabinets to the wall.
No, not if the sink base has visible swelling. Once moisture has worked into the particleboard core, the structural integrity is compromised and the board won’t hold screws or hinges reliably. Refacing covers the surface; it doesn’t fix a rotten core. In that situation we recommend replacing the damaged boxes and refacing only the surrounding cabs that are still dry and square.
No, replacing cabinets alone does not require a city permit in Placentia. However, if your project relocates plumbing, adds electrical circuits, or moves a wall, permitting enters the picture. We handle permits for any scope that needs them, and we pull them before demolition starts. No surprises there.
We recommend thermofoil doors with a heat-resistant finish, ventilation upgrades near ovens and dishwashers, and humidity control in unairconditioned kitchens. Placentia’s Santa Ana corridor pushes temperatures into the triple digits, and that heat cycling is what delaminates cheaper thermofoil. We also advise keeping cabinets closed during wildfire smoke events so particulates don’t work into hinge mechanisms. A little prevention beats a full door replacement. Call (855) 473-6535 to talk through what your kitchen needs.
Service Areas Near Placentia
Our KraftMaid installation and cabinet refacing work takes us beyond Placentia into the surrounding North Orange County communities. We currently serve homeowners in Anaheim, Cypress, Villa Park, La Palma, and Fullerton, with additional coverage in Foothill Ranch and Ladera Ranch. If you’re in a neighboring city and need KraftMaid work done, our Placentia service area team can help. We also handle KraftMaid projects in Rancho Santa Margarita and Coto De Caza for custom cabinetry work across South Orange County. KraftMaid sales & service is available wherever our crews are running jobs.
Book Your KraftMaid Service in Placentia Today
We show up, walk the site, measure honestly, and give you a written line-item quote before any work starts. Do it right the first time – the second time always costs more. Call (855) 473-6535 to schedule your free estimate, and we’ll get your KraftMaid project moving.
Written by Rick Sondermann, Owner at Polaris Contractors, serving Placentia since 1998.