Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Roofing
Windows & doors
Driveway & pavers
FenceFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
CWS Construction in Ontario, CA | Polaris Contractors
We provide independent CWS construction service across Ontario, from foundation retrofits in the 91761 ZIP to tilt-up repair on warehouse shells near the 10 and 15 freeways. The one thing that makes our CWS work here different is simple: we know Ontario’s soil. Rick Sondermann and our crew have spent enough time digging around postwar slabs on former citrus grove land to know where CWS systems fail before we even pull a permit. If you’re dealing with a cracked post-tension slab, loose foundation bolts, or a failing tilt-up panel joint, call (855) 473-6535 for a straight assessment and a free estimate.
Why Ontario Residents Choose Us for CWS Service
CWS systems built for Ontario’s conditions need a contractor who understands both the equipment and the ground it sits on. That’s our advantage. We’re not reading a spec sheet and guessing. We’re the crew that has excavated around CWS-300 post-tension anchors in 91764, found old irrigation lines running under a slab, and knew exactly what that meant for the repair plan before we wrote the estimate. Rick learned construction at Saddleback College and has spent three decades on Southern California job sites, and that experience shapes how we approach every CWS job. We also understand what CWS sales & service requires in terms of proper parts and installation standards, and we apply that knowledge independently. Homeowners in Ontario want a contractor who shows up knowing the difference between a rusted anchor head and a slab that’s just settling normally. We’ll tell you which one you have, and we’ll tell you straight.
We carry OEM CWS parts for critical structural components and keep a local stock of aftermarket bolts, brackets, and hardware for the non-proprietary stuff. That means fewer trips across the Inland Empire and faster turnaround on repairs. You deal with one team from the first inspection to the final sign-off.
Styles & brands we work with
Common CWS Construction Problems We Solve in Ontario
- Post-tension cable corrosion and slab cracking. Ontario’s hot, dry summers pull moisture from the soil, and when that soil shrinks, slabs move. We see corroded CWS-300 cables and failed anchors on ranch homes built in the 1950s through the 1970s, especially in 91761 and 91762. We excavate, replace what’s failed, and address the drainage issue that caused the movement in the first place.
- Tilt-up panel joint failure from Santa Ana wind uplift. Ontario’s warehouse inventory means hundreds of older CWS Tilt-Up Wall Panel Systems taking every Santa Ana season head-on. Joint seals dry out, panels shift, and water gets where it shouldn’t. We repair panels, re-seal joints, and reinforce connections before the next wind event.
- Foundation bolt loosening on former citrus grove land. Many Ontario homes in the 91764 ZIP sit on soil that was orchard ground a generation ago. Decaying roots and old irrigation lines create soft spots, and foundation bolts work loose over time. We install CWS Foundation Bolting Retrofit Kits and tighten the structure to current code.
- Steel truss connection fatigue from thermal cycling. Inland Empire temperatures swing hard, from 110°F afternoons to cold desert nights. Coupled with Santa Ana wind gusts, that thermal cycling fatigues steel connections over years. We find loose bolts and stressed plates on CWS Steel-Framed Roof Trusses more often than you’d think, and we re-torque or replace before there’s a failure.
- Drainage failures that undermine new CWS work. Ontario gets occasional winter rains, and if water isn’t managed, it erodes soil around foundations and slabs. We handle proper drainage and site preparation whenever we’re installing or repairing CWS systems, because a new slab on poor drainage is just a future callback.
CWS Service in Ontario: What Local Conditions Mean for Your Equipment
Here’s something you won’t find on a generic construction site. In Ontario’s 91764 ZIP, a huge share of postwar homes were built directly on former citrus groves. We’ve excavated around more than a few foundations there and found the telltale signs: rusted irrigation pipes, decayed root systems, and pockets of organic soil that were never properly compacted. If you need CWS repair in Montclair for similar grove-soil issues, we bring the same expertise. That organic material breaks down over decades, and the ground settles unevenly. For a CWS post-tension slab, that means the tendons end up carrying loads they were never designed for. The slab cracks, anchors corrode, and suddenly a simple remodel turns into a structural project. Local building inspectors know this. When homeowners in Ontario apply for an ADU permit, the city often requires a soil report and a drainage plan before anything gets approved, because they’re pushing hard to meet state housing mandates and they don’t want new units failing on questionable ground. If you’re planning an ADU on an older Ontario lot, expect that extra step, and line up a contractor who understands what the geotech report means for your CWS foundation work.
Our crew was called to a 1955 ranch home in the 91761 ZIP where the CWS-300 post-tension slab had cracked due to soil subsidence from drought. We also provide Upland CWS service for the same drought-related slab problems. We excavated around the foundation, replaced corroded anchor heads, and installed a French drain to redirect winter rains, passing inspection with the city’s required soil report. That’s the level of detail Ontario demands, and we’re set up for it.
CWS Models & Products We Service in Ontario
We service the full range of CWS structural systems that turn up across Ontario’s residential and industrial landscape. That includes the CWS-300 Series post-tension slab anchors, the CWS Tilt-Up Wall Panel System, CWS Steel-Framed Roof Trusses, and CWS Foundation Bolting Retrofit Kits. For critical structural components, we source OEM CWS parts when they’re available. For non-proprietary items like bolts, brackets, and shims, we use quality aftermarket equivalents that meet or exceed spec. That keeps your repair cost reasonable without cutting structural corners. We always give an honest repair-versus-replace assessment based on Ontario’s soil conditions and long-term durability, because some fixes are worth doing now and some systems are ready to be upgraded. You’ll never get a hard sell from us, just the facts and your options.
See the difference
Before
After
Before
After
Before
AfterCWS Service Pricing in Ontario
| Service | Typical Range in Ontario |
|---|---|
| ADU Construction | $90,000 – $220,000 |
| Home Addition | $45,000 – $130,000 |
| Concrete Driveway Installation | $4,500 – $12,000 |
CWS structural work involving foundations and post-tension slabs sits within these project ranges depending on scope, access, and what the soil report says. A simple anchor head replacement costs far less than a full slab pour, and we’ll tell you which situation you’re in before any work begins. A free estimate from us includes an on-site inspection, a written line-item quote, and a straight conversation about what’s urgent and what can wait. Call (855) 473-6535 to schedule yours. Check our Ontario service area page if you want to confirm we cover your ZIP.
Serving Ontario, CA — Our Local Coverage Area
We’re based in the Ontario area and know this community well. Use the map below to see our service coverage — if you’re nearby, we can almost certainly help.
FAQs – CWS Construction in Ontario
CWS post-tension slabs crack in Ontario because the region’s hot, dry summers shrink the soil, especially in neighborhoods built on former citrus grove land. That ground movement creates uneven support, stressing the slab until cracks form. We rebuild the slab and fix the drainage so the same problem doesn’t return. Call (855) 473-6535 for an exact assessment.
Yes, in most cases Ontario’s building department requires a soil report and drainage plan for ADU permits, particularly in older neighborhoods like 91764 where citrus grove soil is common. We offer CWS service in Chino with the same soil-report handling. We handle that step as part of the project, so you’re not chasing a geotech engineer on your own.
CWS foundation bolting retrofits anchor the sill plate of a 1950s or 1960s ranch home to its concrete foundation, replacing bolts that have loosened from soil movement or corroded over time. It’s one of the most effective upgrades we do in Ontario’s older neighborhoods, and it brings the structure up to current seismic code.
Santa Ana winds and extreme temperature swings cause tilt-up panels to shift and their joint seals to fail. Once water gets inside the joint, it accelerates deterioration. We repair the joints and reinforce panel connections on CWS Tilt-Up Wall Panel Systems across Ontario’s warehouse districts. For San Antonio Heights CWS service, we bring the same tilt-up expertise to local industrial buildings.
Yes, we inspect, re-torque, and replace fatigued connections on CWS Steel-Framed Roof Trusses. Ontario’s temperature swings stress steel more than most owners realize, and catching loose bolts early prevents a much bigger problem later. Call (855) 473-6535 for a quote.
Service Areas Near Ontario
Beyond Ontario, our CWS crews work throughout the surrounding Inland Empire and Orange County communities. We serve Rancho Cucamonga, Chino, Montclair, Upland, and Fontana for Ontario-adjacent projects. For other nearby coverage, see CWS service in Jurupa Valley or CWS service in Claremont.
Book Your CWS Service in Ontario Today
Do it right the first time, the second time always costs more. If you’ve got a CWS structural issue in Ontario, call (855) 473-6535 for a free estimate and an honest repair-or-replace conversation. We serve all four Ontario ZIPs: 91758, 91761, 91762, and 91764.
Written by Rick Sondermann, Owner at Polaris Contractors, serving Ontario since day one.