Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Roofing
Windows & doors
Driveway & pavers
FenceFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
ECO Window Systems Construction in Fontana, CA | Polaris Contractors
We provide ECO Window Systems sales & service—independent repair, replacement, and construction—across Fontana, from the post-war blocks south of the 10 to the stucco tracts in 92336 and 92337. The thing that sets our work apart here is simple: we know Fontana’s split housing stock well enough to plan an opening or a replacement around what’s actually under the stucco and in the soil, not just what’s visible from the street. If your ECO windows drag, fog, or leak, call (855) 473-6535 and we’ll tell you straight whether it’s hardware or a full replacement.
Why Fontana Residents Choose Us for ECO Window Systems Service
We’ve pulled ECO Window Systems units out of 1950s Fontana tract homes, 1970s mill-neighborhood houses, and 1990s north-side stucco subdivisions. That range matters because the same brand behaves differently depending on the era of the install and the block you live on. We’re not an authorized ECO Window Systems dealer, and we won’t pretend to be: we’re an independent construction and window specialist, which means our recommendations are based on what’s actually failing in your home, not on a sales quota. Rick Sondermann, who owns Polaris Contractors, learned framing and estimating the old way at Saddleback College and spent decades on coastal remodels before bringing that experience to Inland Empire tract work. Do it right the first time, the second time always costs more. We carry that into every Fontana opening we touch.
Styles & brands we work with
Common ECO Window Systems Construction Problems We Solve in Fontana
- Slider tracks packed with Inland Empire dust and grit. Older south Fontana homes were built for open-window cooling, and decades of summer heat and wind-driven dust means original aluminum ECO slider tracks grind down until rollers bind and snap. We see this constantly in 92335 near the old mill neighborhoods: the window looks shot, but often it’s just dead hardware in a frame that’s still square.
- Warped vinyl sash and failed weatherstripping on south and west elevations. Fontana’s intense afternoon sun and Santa Ana wind cycle heat these elevations hard. Vinyl ECO units installed without insulated frames or proper shading warp enough that seals gap, and wind-driven dust ends up on the interior sill. We spec replacement sash and upgraded weatherstripping rather than forcing a warped unit to close.
- Fogged insulated glass in 1990s and 2000s north Fontana units. In the 92336/92337 tracts, we replace far more failed sealed glass than frames. The haze is visible from the curb before anything else shows. If the frame and sash are straight, we swap glass; if the aluminum is pitted or the vinyl is out of profile, we replace the unit.
- Stucco-over-frame installs with no sill pan or flashing. When we pull an original aluminum ECO unit from a stucco wall and find no flashing beneath it, water has usually been tracking down the rough opening for years. Fontana’s Santa Ana-driven rain makes this worse: the stucco looks fine from outside, but the framing behind it is punky. We rebuild the opening correctly before anything goes back in.
- Windows racked out of square from soil movement. South Fontana lots with undocumented fill or buried debris settle unevenly. An ECO slider that was square at install binds within a few seasons because the opening moved. We don’t just shim and go; we check the rough opening and footing before we commit to hardware or replacement.
ECO Window Systems Service in Fontana: What Local Conditions Mean for Your Equipment
Here’s what a north Fontana replacement almost never involves: a wall opened up and excavation stopped because the soil won’t hold a footing. In the older south-side blocks near the former Kaiser Steel footprint, buried industrial debris and undocumented fill from the mill era are a routine discovery when we cut a new opening or add a window to an addition. Fontana contractors working the 92335 core have pulled rusted steel scrap, concrete chunks, and ash-laden fill from openings that looked clean from the surface. It essentially never happens in the graded 1990s and 2000s subdivisions up in 92336 and 92337, where the pads were engineered and compacted. What that means for an ECO Window Systems owner is this: a Pedley ECO Window Systems service call on Foothill Blvd south of the 10 can turn into a re-engineering job on the spot, while a north Fontana swap is usually straightforward. We plan for the south-side reality before we cut anything.
ECO Window Systems Models & Products We Service in Fontana
We work on the full range of Florida-fabricated ECO Window Systems product installed across Fontana and the Inland Empire: aluminum single-hung and horizontal sliders from the 1950s through the 1970s, ECO vinyl single-hung and slider replacement units, aluminium sliding glass doors and fixed picture window units, and laminated or insulated glass packages common in Southern California replacements. Our parts approach is deliberately simple: we spec correct-fit ECO-compatible rollers, weatherstrip, glass, and balance components rather than defaulting to whatever the supply house has on the shelf. These aluminum and vinyl units often outlive their hardware, so repairing a straight frame is usually the smart money. When a frame is pitted or a sash is warped out of profile, we tell you replacement beats repeated repair. We also stock common ECO-compatible hardware locally so Fontana turnaround doesn’t wait on a Florida shipment.
See the difference
Before
After
Before
After
Before
AfterECO Window Systems Service Pricing in Fontana
What you’ll pay depends on whether we’re fixing hardware, replacing glass in a straight frame, or pulling a failed unit and rebuilding the opening. Here’s the honest range for the work we do most often in Fontana:
| Project | Typical Fontana Range |
|---|---|
| Window Replacement | $4,500 – $15,000 |
| Impact Window Installation | $8,000 – $25,000 |
| Home Addition | $45,000 – $130,000 |
Hardware-only repairs like rollers or weatherstripping run below the bottom of that window replacement range. Impact-rated units cost more because of the laminated glass and heavier frame, and home additions vary by scope and what we find when we open the ground. Call (855) 473-6535 for a free estimate; we’ll give you a written line-item quote after we actually look at the opening.
Serving Fontana, CA — Our Local Coverage Area
We’re based in the Fontana area and know this community well. Use the map below to see our service coverage — if you’re nearby, we can almost certainly help.
FAQs – ECO Window Systems Construction in Fontana
In most cases, just new hardware. Aluminum ECO frames from the 1950s through the 1970s—like those we see on Glen Avon ECO Window Systems service calls—were built thick enough to outlast their rollers and weatherstripping by decades. We clean the tracks of Inland Empire grit, spec correct-fit replacement rollers, and re-seal the sashes. If the frame is square, you keep the window. If it’s pitted or racked from soil movement, we’ll tell you. Call (855) 473-6535 and we’ll check it in person.
Failed insulated glass seals. The 1990s and 2000s north Fontana subdivisions used insulated units with edge seals that break down under sustained Inland Empire heat cycling. Once the seal fails, the argon leaks and condensation forms between the panes. The neighbor’s older single-pane aluminum units can’t fog because there’s no gas to lose. We replace the glass if the frame is solid.
Yes, and regularly. In the older 92335 core near the former Kaiser Steel footprint, we hit buried mill debris, undocumented fill, and compacted industrial waste when we excavate for a new opening or addition wall. On a post-war block off Foothill Blvd, our crew opened a wall for an ECO sliding-unit replacement and hit steel debris just below grade. We stopped, documented it with the city, and rebuilt the footing and opening rather than setting the new unit into soil that would settle and rack it out of square. North Fontana tract pads rarely have this issue. Call (855) 473-6535 before you plan a south-side addition window.
For wind resistance and long-term profile stability, aluminum holds up better on exposed south and west elevations. Vinyl is quieter and more thermally efficient, but Fontana’s heat and Santa Ana wind cycling warps cheaper vinyl sashes enough to compromise seals. We specify aluminum for high-wind elevations and vinyl for shaded north and east sides where thermal performance matters more.
Most north Fontana subdivisions in 92336 and 92337 have design review requirements for visible window changes. We prepare the submittal drawings and material specs in advance, and we only use units that meet the HOA’s frame-color and glass-tint standards. If your HOA requires a specific ECO series or finish, we order it through our Rialto ECO Window Systems service supply channel. Call (855) 473-6535 and we’ll pull your HOA’s guidelines before we spec anything.
Service Areas Near Fontana
We also cover ECO Window Systems service in Bloomington, ECO Window Systems service in Highgrove, and the surrounding Inland Empire communities. If you’re in Anaheim, Cypress, Villa Park, Foothill Ranch, La Palma, or Ladera Ranch, call us; we’ll let you know if we can get a crew to your block. For the full picture, see our Fontana service area page.
Book Your ECO Window Systems Service in Fontana Today
Whether it’s dragging sliders in south Fontana, fogged glass in the north tracts, or an addition window that needs an honest look at the soil before we cut, call (855) 473-6535. We’ll schedule the estimate, walk the opening with you, and give you a written quote that holds. Same-day visits are available for urgent issues.
Written by Rick Sondermann, Owner at Polaris Contractors, serving Fontana since our first Inland Empire window project.