Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Roofing
Windows & doors
Driveway & pavers
FenceFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Jerith Construction in Highland, CA | Polaris Contractors
We provide independent Jerith fence installation and repair across Highland, including the 92346 zip code, for vinyl and aluminum ornamental fencing and railing. The thing that sets our Jerith work in Highland apart is that we build footings for the clay soil here, not for a generic California lot. If you’ve watched a Jerith fence start to lean or pull apart within a few seasons, the problem usually isn’t the product. It’s the footing, and in Highland the footing has to be done differently than a flatland contractor would guess. Call us at (855) 473-6535, and we’ll come look at your fence line before you spend money on anything else.
Why Highland Residents Choose Us for Jerith Service
We’ve installed and repaired Jerith ornamental fencing and railing across the Inland Empire for years, including Redlands Jerith service, so we know the product line’s picket spacing, bracket systems, and finish behavior in Highland’s sun and soil. We’re an independent contractor, not affiliated with or authorized by Jerith, and that means we give you straight answers about what’s worth repairing versus replacing. Rick Sondermann grew up in Corona del Mar and has spent the better part of three decades building and renovating homes, and he brings that same philosophy here: do it right the first time, because the second time always costs more.
When a Highland homeowner calls us about a Jerith fence, we don’t start by selling a new fence. We start by figuring out why the old one failed. Often it’s a post set in shallow concrete that the clay soil heaved out of plumb. We reset it below the active soil zone, rehang the existing panels on new hardware, and save you the cost of a full replacement. If it’s genuinely worn out, we’ll tell you that too, and use Jerith OEM replacement rails, pickets, and brackets so the new work matches the old. We won’t patch a failing run with aftermarket vinyl that’s a shade off and thinner-walled than the original.
There’s also a practical reason Highland homeowners choose us: we understand this specific climate. The inland heat and Santa Ana winds aren’t abstract to us. We’ve seen what they do to south-facing white vinyl over a decade, and we spec accordingly.
Styles & brands we work with
Common Jerith Construction Problems We Solve in Highland
Jerith makes a solid product. The failures we see most often in Highland come from what the local conditions do to the installation over time.
- Post footings heaved by expansive clay. Highland’s clay-heavy soils swell when wet and shrink when dry. That seasonal movement racks Jerith vinyl posts, separates panels, and leaves fences leaning within a few seasons if the posts weren’t set deep enough with proper drainage. We pull the old footings, re-set posts below the active soil zone, and rehang the existing panels on new hardware.
- UV chalking and brittleness on sun-exposed runs. The south- and west-facing sections that take full inland sun through a Highland summer lose their gloss first. White vinyl dulls, chalks, and eventually gets brittle at the bracket points. We can often replace the worst sections with OEM Jerith stock rather than redoing the whole run.
- Wind racking at foothill edges. Santa Ana gusts torque aluminum pickets and loosen rail brackets where posts aren’t set deep enough, especially on exposed lots near the foothills. We check post depth and bracket torque on every aluminum fence we service in Highland.
- Ember and ash accumulation at the wildland-urban interface. Fences that sit near the San Bernardino National Forest boundary collect embers and ash at the base. That buildup can scorch or discolor vinyl and compromise bottom rails, which is a fire-hardening issue flatland contractors often miss.
- Fence lines that need to coordinate with Chapter 7A work. When we reroof or re-side a Highland home near the foothills, the fence that abuts the structure often has to be re-set or re-detailed as part of the same permit scope. We handle that as one coordinated job under Polaris Contractors, not as two separate bids from two different crews.
Jerith Service in Highland: What Local Conditions Mean for Your Equipment
Highland sits at the base of the San Bernardino Mountains in the hot, dry Inland Empire, and that position shapes everything about how a Jerith fence holds up here. We also provide San Bernardino Jerith service for homeowners in the nearby foothill communities. The parcels that back up toward the San Bernardino National Forest are in a wildland-urban interface zone, which means wildfire-conscious building codes apply in ways they don’t down in the flatland neighborhoods. A roof replacement or re-siding project on those foothill streets can trigger Chapter 7A ignition-resistant requirements: ember-resistant vents, Class A roof assemblies, ignition-resistant siding at the wall base. A Jerith vinyl or aluminum fence that abuts the structure often has to be re-set or re-detailed as part of that same permit scope, and if your fencing contractor doesn’t coordinate with the roofer and the siding crew, you get a fence line that doesn’t close properly against the new wall base. We’ve handled that exact coordination on sloped lots off the foothill streets near the national forest boundary in 92346. That’s the difference between a fencing crew that shows up with post hole diggers and a general contractor who sees the whole envelope.
On one such lot, we replaced a leaning Jerith Classic picket run where the original posts had been set in shallow concrete and the expansive clay had heaved them out of plumb. We pulled the old footings, re-set the posts below the active soil zone with proper drainage, and reused the existing pickets and rails on new hardware. Because the job was tied to a roof replacement, we coordinated the fence line with the Chapter 7A ignition-resistant detailing on the adjacent wall. The homeowner didn’t have to manage two contractors and two schedules. We handled the fence, the roof, and the wall base as one project under one agreement.
Jerith Models & Products We Service in Highland
We work on the full Jerith residential line, including the Classic picket vinyl fence, the Berkshire privacy vinyl fence, Traditional aluminum fence, and the Vinyl Railing series. When a profile is still in production, we use Jerith OEM replacement rails, pickets, and brackets, because aftermarket vinyl rarely matches the original color and wall thickness. We keep common OEM components on hand for the Jerith models most often installed in Highland, which means fewer weeks waiting on a special order when a panel gets damaged. When a fence has multiple broken sections and weathered posts, we give a straight replace-versus-repair call rather than patching a failing run. For the full scope of what we offer, see our Jerith sales & service page.
See the difference
Before
After
Before
After
Before
AfterJerith Service Pricing in Highland
These are the ranges we typically quote for Jerith work in Highland, based on the scope of the job and the condition of the existing fence or structure:
| Service | Price Range |
|---|---|
| Vinyl Fence Installation | $3,500 – $9,000 |
| Aluminum Fence Installation | $4,000 – $10,000 |
| Roof Replacement | $8,000 – $20,000 |
Your actual cost depends on the linear footage, post depth and soil conditions, whether the job ties into a larger permit scope like a Chapter 7A re-roof or re-side, and how much of the existing Jerith material we can reuse. A free estimate from us includes a site walk where we check post plumb, bracket torque, and footing depth. We’ll give you a written line-item quote so you know exactly what you’re paying for before any work starts. Call (855) 473-6535 to schedule yours.
Serving Highland, CA — Our Local Coverage Area
We’re based in the Highland area and know this community well. We also offer Jerith service in Muscoy and surrounding communities. Use the map below to see our full service coverage — if you’re nearby, we can almost certainly help.
FAQs – Jerith Construction in Highland
Yes, if the posts are set correctly. Highland’s clay swells and shrinks with seasonal moisture, and shallow footings get heaved out of plumb within a few seasons. We set Jerith posts below the active soil zone, with drainage, so the fence stays true. If you’re worried about an existing fence, call (855) 473-6535 and we’ll check the post depth before you commit to anything.
In Highland, leaning posts are almost always an install problem. Jerith’s warranty covers manufacturing defects, not footings that were poured too shallow for expansive clay. We see it constantly: the product is fine, the hole wasn’t deep enough. We can fix it by resetting the posts properly, often reusing your existing pickets and rails. Call (855) 473-6535 for an assessment.
If your home sits near the San Bernardino National Forest boundary and you’re doing a roof replacement or re-siding, very likely yes. Chapter 7A applies to the structure, and a fence that abuts the wall base often has to be re-set or re-detailed as part of that permit scope. We handle the fence and the envelope work under one contract, so you don’t end up with a fence line that doesn’t close against the new siding or stucco.
Usually, yes. We use Jerith OEM replacement rails, pickets, and brackets whenever the profile is still in production, because aftermarket vinyl rarely matches the original color and wall thickness. If your fence has weathered significantly, the new sections may look brighter at first, but OEM stock blends far better over time than aftermarket. We’ll show you the options before you decide.
Aluminum holds its finish better in direct inland sun, but it’s more vulnerable to wind racking at exposed foothill edges if the posts aren’t set deep enough. Vinyl resists the wind better structurally but shows UV chalking on south- and west-facing runs over time. The right choice depends on your lot’s exposure, and we’ll give you a straight recommendation for your specific street in Highland. Call (855) 473-6535 and we’ll talk it through.
Service Areas Near Highland
Beyond Highland, we serve the surrounding Inland Empire communities. If you’re in the Highland service area, reach out directly. We also cover Jerith service in Mentone and Jerith service in Calimesa for homeowners in the foothill corridors.
Book Your Jerith Service in Highland Today
If your Jerith fence is leaning, sun-faded, or needs to coordinate with a Chapter 7A roof or siding scope, we’re the team to call. We also handle Jerith repair in Loma Linda and throughout the Inland Empire. One contractor, one schedule, from the roof down to the pavers. Call (855) 473-6535 to schedule your free estimate, and we’ll come walk your fence line in Highland.
Written by Rick Sondermann, Owner at Polaris Contractors, serving Highland and the Inland Empire. Rick learned the trade the old way, from a father who was a finish carpenter, and he still believes in doing things once and doing them right.