Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Roofing
Windows & doors
Driveway & pavers
FenceFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Jerith Construction in Newport Beach, CA | Polaris Contractors
We provide independent Jerith fence, railing, and gate service across Newport Beach, from Balboa Island to the Peninsula and inland through Dover Shores and the Eastbluff. What separates our Jerith work here isn’t the vinyl itself, it’s knowing how the brand’s posts, rails, and hardware behave on filled tideland lots and in salt-laden air, which is a different animal than inland fence work. Call (855) 473-6535 if you’ve got a Jerith run that’s racked, chalked, rust-stained, or leaning, and we’ll tell you straight whether it can be salvaged or needs a reset.
Why Newport Beach Residents Choose Us for Jerith Service
Rick Sondermann grew up in Corona del Mar and has spent close to three decades building and renovating homes up and down this coastline, so Jerith runs here aren’t a side job to us, they’re part of the landscape we’ve been working in for years. We’ve installed and repaired Jerith vinyl fencing and railing across Newport Beach’s tight coastal lots, and we know how the brand’s profiles, post caps, and aluminum-reinforced rails actually hold up when the marine layer sits on them every morning and the Santa Anas push through every fall. We carry the Jerith OEM posts, caps, rails, and gates wherever they’re still available so repairs match the existing run instead of looking like a patch job. For more on what we cover with this brand, see our Jerith sales & service page.
We’re independent, not factory-authorized, which means we answer to you, not to a manufacturer’s warranty department. Do it right the first time, the second time always costs more. That’s how Rick has run the crew since day one.
Styles & brands we work with
Common Jerith Construction Problems We Solve in Newport Beach
- Sagging gates and seized latches on bayfront runs. Salt-laden onshore air attacks the stainless or galvanized fasteners and hinge hardware before the vinyl itself shows any wear. Gates start dragging on the latch side, latches won’t throw, and the whole assembly feels tired. We replace the corroded hardware with marine-grade stainless and set the gate plumb again.
- Racked panels and heaved footings on Balboa Island fill. Differential settlement heaves post footings and racks panels out of plumb. The fence looks failed but it’s the ground that moved. We reset posts down to stable bearing or tie them into existing pile caps so the run stays true.
- Chalked and yellowed white vinyl on west-facing runs. UV and marine humidity chalk and yellow the vinyl surface, especially on sun-exposed west-facing property lines. New sections next to older ones look mismatched even when the profile is identical. We’ll tell you honestly whether one section can pass or the whole run needs to go.
- Rust weeping down the vinyl from aluminum stiffener rails. The aluminum rails inside gate frames corrode at cut ends and weep rust stains down the white vinyl where the rail wasn’t sealed. It’s a small detail that turns into an eyesore and then a structural issue if left alone.
- Fence replacement ahead of Coastal Commission view-corridor reviews. We’ve worked on plenty of Newport Beach jobs where the fence has to be right before the coastal permit process even gets meaningful. A clean, plumb, properly-footed Jerith run shows the commission what they need to see.
Jerith Service in Newport Beach: What Local Conditions Mean for Your Equipment
Nearly every Balboa Island and Peninsula lot sits on filled tideland, so a Jerith fence here is really a footing-engineering job in disguise. The posts need to be set below the fill to stable bearing or tied into the existing pile caps, and dewatering during digging is routine, as in, we expect water in the hole and plan for it. None of that applies to the inland tract lots a few miles away, where you dig four feet, drop a post, and pour, and that’s why a fence company that does fine work in Irvine can get surprised on Balboa Island. On a bayfront lot off South Bayfront, our crew tore out a chalked, racked Jerith privacy run whose posts had heaved on the fill and reset new posts down to stable bearing before hanging fresh panels and an aluminum-reinforced gate. We swapped the corroded hinges for marine-grade stainless and sealed the gate rail cut ends so the salt air wouldn’t weep rust down the vinyl, and the run now sits plumb against the property line ahead of the owner’s Coastal Commission view-corridor review.
Jerith Models & Products We Service in Newport Beach
We work on the Jerith Traditional vinyl privacy fence with dog-eared picket panels, the Claremont and Colonial picket-style lines, aluminum-reinforced vinyl railing and gate systems, and decorative vinyl picket with post caps and trim. The question we hear most is whether to repair or replace, and our stance is simple: we match Jerith OEM posts, caps, rails, and gates wherever they’re still available so profiles and colors line up with the existing run, and we use quality aftermarket stainless hardware in salt-exposed spots. On a sound run with one failed section or gate, we repair. On a racked or chalked-out fence, we’re honest that partial replacement rarely matches and recommend the full run. We keep common post caps and gate hardware on the truck so most Newport Beach service calls finish in one visit.
See the difference
Before
After
Before
After
Before
AfterJerith Service Pricing in Newport Beach
Jerith fence and railing work in Newport Beach costs what it costs because of the ground under the posts and the air around the hardware. A straightforward vinyl fence install runs $3,500 to $9,000, an aluminum fence runs $4,000 to $10,000, and if you’re adding living space along with the fence work, a home addition runs $45,000 to $130,000. The footing work on filled tideland lots adds real labor, and salt-rated hardware costs more than big-box galvanized, but the alternative is a fence you’re resetting in five years. We’ll walk the property line with you, look at what’s there, and write a line-item estimate so you know exactly where the money goes before any work starts. Call (855) 473-6535 to schedule a free estimate.
| Service | Price Range |
|---|---|
| Vinyl Fence Installation | $3,500 – $9,000 |
| Aluminum Fence Installation | $4,000 – $10,000 |
| Home Addition | $45,000 – $130,000 |
Serving Newport Beach, CA — Our Local Coverage Area
We’re based in our Newport Beach service area and know this community well. Use the map below to see our service coverage — if you’re nearby, we can almost certainly help.
FAQs – Jerith Construction in Newport Beach
The vinyl itself will hold up fine; it’s the fasteners, hinges, and gate hardware that salt air attacks first. We use marine-grade stainless replacements and seal aluminum rail cut ends to stop rust weeping. Call (855) 473-6535 and we’ll come look at what’s corroding before it becomes a gate that won’t close.
Differential settlement on the fill is almost always the culprit. The posts have heaved or sunk at different rates, so the panels rack even though the vinyl and rails are intact. Resetting the posts below the fill to stable bearing fixes the lean permanently. If you’re tired of looking at it, call us and we’ll dig a test hole and show you what’s really under there.
In most cases on bayfront or Peninsula lots, yes, a new fence runs through the Coastal Commission or the city’s coastal permit process, especially if it touches a view corridor. We’ve set fences ahead of view-corridor reviews enough times to know what the commission wants to see. Call (855) 473-6535 and we’ll talk through your property’s specific situation.
If the existing run isn’t chalked or badly UV-faded, and the profile is still a current Jerith line, we can usually match it with OEM sections. If the old vinyl is yellowed or chalked, a new section will stand out no matter how carefully we match the profile. We’ll tell you honestly which way to go.
Repair usually wins here. Latches and hinges are replaceable parts, and marine-grade stainless replacements cost far less than a new gate. We repair the gate, seal the cut ends, and you get years more out of the run. Call (855) 473-6535 for a quote on the hardware swap.
Service Areas Near Newport Beach
In addition to Newport Beach, we take Jerith service calls in Costa Mesa, Huntington Beach, and the surrounding Orange County communities. If you’re in a neighboring city and wondering whether your fence issue is footing-related or hardware-related, that’s exactly the kind of thing we sort out on the first visit. See Jerith service in Costa Mesa and Jerith service in Huntington Beach for specifics on those areas.
Book Your Jerith Service in Newport Beach Today
If your Jerith fence is leaning, rust-stained, or just looks tired against the property line, call (855) 473-6535 to schedule your free estimate. Rick and the crew will come out, look at the ground and the hardware, and give you a straight answer on what it takes to fix it right.
Written by Rick Sondermann, Owner at Polaris Contractors, serving Newport Beach since the 1990s.