Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Roofing
Windows & doors
Driveway & pavers
FenceFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Unilock Construction in Banning, CA | Polaris Contractors
We provide independent Banning General Contractor Unilock construction service across the city, from paver patios in the postwar tract neighborhoods to driveways in the Sun Lakes hillsides. The one thing that makes our Unilock work here different is that we build every installation for the San Gorgonio Pass wind corridor: anchored edge restraint, wind-aware joint sand specification, and base compaction that holds up to 20 – 40 mph gusts blowing sand through your yard. We know how Unilock systems perform in this climate because we’ve been putting them in across the Pass for years. Call (855) 473-6535 for a free estimate on your Unilock project.
Why Banning Residents Choose Us for Unilock Service
Our crew has installed Unilock pavers and walls across the San Gorgonio Pass for years, so we know how their systems behave under sustained wind and blown sand. We are an independent Unilock contractor, not authorized, sponsored, or endorsed by Unilock, and we stand behind our workmanship and material selection. When a Richmond Road homeowner calls us about a Brussels Block patio that has gone soft at the edges, we already know what we’re likely to find: pass winds have driven the fines out of the joints and started unraveling the bedding layer. By the time we both walk the site, the wind has already told us what broke. And Rick Sondermann, who runs Unilock sales & service at Polaris Contractors, learned early in his three decades of building that a paver patio is only as good as the base under it. His father was a finish carpenter who believed in doing things once and doing them right, and that is the standard our whole crew works to when we build in Banning.
Styles & brands we work with
Common Unilock Construction Problems We Solve in Banning
Banning is not Palm Springs or Ontario when it comes to paver behavior. The wind changes everything. These are the failures we see most often in this city:
- Sand infiltration and joint erosion in Brussels Block and Beacon Hill pavers. This is the big one in Banning. Sustained 20 – 40 mph pass winds drive fines out of the joints over a season or two, and the bedding layer starts to loosen under foot traffic. We have pulled up Brussels Block pavers in the Sun Lakes area that were practically floating because the joint sand had scoured away on the windward side.
- Edge spalling and face chipping on Richcliff pavers. The high-desert sun in Banning bakes the surface to 140 degrees in July, and winter nights at roughly 2,300 feet can dip to freezing. That thermal cycling causes micro-cracks along paver edges, and on Richcliff units you see the face start to spall where the top layer separates from the body.
- Efflorescence blooming on Bristol Valley and Brussels Block units. After Banning’s winter wetting followed by rapid drying, north-facing patios and shaded walkways show white mineral deposits rising out of the concrete. The condition is cosmetic but persistent, and the fix is not just scrubbing, it is managing the water that is moving through the base.
- Base destabilization on sloped Sun Lakes-area properties. Wind-driven sand migrates under paver edges on slopes, creating rocking units and differential settlement. What looks like a paver problem is almost always a base compaction problem caused by sand movement.
- Edge restraint failure on driveways and large patios. Many older Banning installations were built with plastic or minimal edge restraint, and the wind finds the gaps. Once the outside course starts to wander, the whole field can follow. We anchor the windward edge properly, and the installation stops working itself apart.
Unilock Service in Banning: What Local Conditions Mean for Your Equipment
Here is the piece no other page will tell you. Banning sits at the western edge of the San Gorgonio Pass, where the wind does not gust occasionally, it blows routinely, and it carries fine sand that acts like a low-pressure sandblaster against paver joints. In the San Gorgonio Pass wind corridor, paver patios and driveways in Banning lose joint sand faster than in calmer Inland Empire cities, so Unilock installations here need wind-aware edge restraint and a joint-sand maintenance schedule to keep from unraveling. When a Beaumont contractor tells you the same paver method that works in Beaumont is fine in Banning, they have not been paying attention. We build with edge restraint that is anchored, not just staked; we specify a compacted aggregate base that resists the wind-driven sand trying to get underneath; and we choose joint sand that does not blow out after one windy season. That is not optional in Banning. It is the difference between a patio that lasts ten years and one you are resetting after three.
Unilock Models & Products We Service in Banning
We service and install the Unilock lines most common in Banning’s housing stock. Brussels Block, Beacon Hill, Richcliff, and Bristol Valley are the models we see most in the postwar tract neighborhoods and the Sun Lakes hillside developments. We use genuine Unilock pavers, caps, and wall units for color and dimensional matches, and we specify quality polymeric joint sand and compacted aggregate base suited to wind-driven sand conditions. When a patio or wall fails, we diagnose whether the base, the joint sand, or the units themselves are at fault. We repair localized areas when the base is sound, and recommend full replacement only when settlement or spalling is widespread. For older postwar homes on 92220 lots, that repair-vs-replace call is the difference between a patio you re-point and a patio you tear out entirely.
See the difference
Before
After
Before
After
Before
AfterUnilock Service Pricing in Banning
Pricing for Unilock work in Banning depends on the surface area, the base condition, and how much the wind has already done to the existing installation. Here are the ranges for the two Unilock services we handle most in this city:
| Service | Price Range |
|---|---|
| Paver Patio Installation | $3,500 – $11,000 |
| Paver Driveway Installation | $7,000 – $18,000 |
For what a repair or reset costs, it depends on the diagnosis: joint-sand replenishment and edge restraint work run lower; full base reconstruction runs toward the replacement end. What a free estimate includes is a walk of your site, a base assessment, and a written line-item quote so you know exactly what you are paying for. Call (855) 473-6535 to schedule one. Do it right the first time, the second time always costs more.
Serving Banning, CA — Our Local Coverage Area
We’re based in the Banning area and know this community well. Use the map below to see our service coverage — if you’re nearby, we can almost certainly help.
FAQs – Unilock Construction in Banning
Banning’s San Gorgonio Pass winds strip joint sand out of paver joints at a rate that calmer cities like Redlands or Unilock repair in Yucaipa simply do not experience. The fix involves anchored edge restraint, a wind-rated polymeric sand, and an annual joint-sand check on the windward side. Give us a call at (855) 473-6535 and we can take a look at what your patio is doing.
Yes, Unilock pavers are concrete units designed for cyclic temperatures, but the base preparation matters more at 2,300 feet than the paver itself. A poorly drained or under-compacted base will fail under freeze-thaw even with good pavers. That is exactly the condition we account for in every Banning installation.
For Banning driveways we tend to steer homeowners toward Richcliff or Brussels Block with a permeable joint sand and strong edge restraint. The style choice is less about the paver face and more about the edge treatment and the joint material that will not blow away after one spring wind event.
We do both. A homeowner in the Sun Lakes area called us after spring gusts scoured the joint sand out of a five-year-old Unilock Brussels Block patio and several units were rocking. We pulled the loose pavers, re-compacted the base, re-set the units with fresh polymeric sand, and added anchored edge restraint on the windward side; the patio has held through two subsequent wind events. Most Banning repair jobs follow that same pattern.
No. We are an independent Unilock contractor, not authorized, sponsored, or endorsed by Unilock. What we bring is years of hands-on installation and repair experience with Unilock pavers and wall systems across Banning, plus genuine Unilock units for color and dimensional matches. The distinction matters: we work for you, not for the manufacturer. Call (855) 473-6535 for a free estimate.
Service Areas Near Banning
We serve all of Banning service area within 92220 plus the surrounding Pass communities. We also provide Unilock service in Hesperia for high-desert projects up the hill, and Unilock service in Cabazon just west of the Pass. Beaumont, Cherry Valley, and Calimesa are also in our regular coverage for Unilock patios and driveways. Wherever the wind blows, we build accordingly.
Book Your Unilock Service in Banning Today
If your Unilock patio or driveway is showing the signs Banning’s wind delivers, let us put your mind at ease with a free estimate. We will diagnose the problem, tell you what is worth repairing, and never push a replacement you don’t need. Call (855) 473-6535 and we’ll set up a walkthrough. From the roof down to the pavers, Polaris Contractors handles the full scope, including Unilock in Calimesa and throughout the Pass.
Written by Rick Sondermann, Owner at Polaris Contractors, serving Banning and the San Gorgonio Pass since 1998.